Two types of tetragonal zirconia polycrystals (TZP), a ceria-stabilized TZP/Al2O3 nanocomposite (CZA) and a conventional yttria-stabilized TZP (Y-TZP), were sandblasted with 70-microm alumina and 125-microm SiC powders, then partially annealed at 500-1200 degrees C for five minutes. Monoclinic ZrO2 content was determined by X-ray diffractometry and Raman spectroscopy. Biaxial flexure test was c...

This study investigated the effects of surface treatments on the bond strength of a resin composite to a commercially pure titanium. The bonding surfaces of all titanium specimens were ground with 1,000-grit silicon carbide paper and then subjected to one or more of these surface treatments: sandblasting with alumina (sand), etching with 45wt% H2SO4 and 15wt% HCl (SH-etchant) at 70°C for 10 min...

Purpose. This study evaluated the influence of recycling process on the torsional strength of mini-implants. Materials and Methods. Two hundred mini-implants were divided into 4 groups with 50 screws equally distributed in five diameters (1.3 to 1.7 mm): control group (CG): unused mini-implants, G1: mini-implants inserted in pig iliac bone and removed, G2: same protocol of group 1 followed by s...

objectives: this study aimed to evaluate the effect of different ceramic surface treatments after machining grinding on the biaxial flexural strength (bfs) of machinable dental ceramics with different crystalline phases. materials and methods: disk-shape specimens (10mm in diameter and 1.3mm in thickness) of machinable ceramic cores (two silica-based and one zirconia-based ceramics) were prepar...

This study evaluates the effect of post-manufacturing treatment on compressive performance additively manufactured components. The components were thin cylindrical shells with an aspect ratio 25:1 using laser powder bed fusion and that then surface treated by means sandblasting or turning. as-printed subsequently samples uniaxially compressed until failure to depict condition mechanical behavio...

background. failure of orthodontic bracket bonds is a common occurrence during orthodontic treatment. different tech-niques have been suggested in the literature to remove resin residues from the bracket bases and enamel surfaces to prepare the surfaces again after debonding. this study attempted to compare multiple rebond shear strengths (sbs) of debonded brackets following preparation with sa...

Debonding of denture teeth from the base has posed a great problem to clinician and patient. Chemical mechanical treatments have been performed separately, but there are no studies using combination chemical surface treatments. This study aims at evaluating comparing bond strength by 60 maxillary right central incisor were used in 5 groups for treatment on ridge lap area: 1 untreated, 2-sandbla...

The purpose of this study is to compare the shear bond strength of different resin bases and artificial teeth made of ceramic or acrylic resin materials and whether tooth-base interface may be treated with aluminium oxide sandblasting. Experimental measurements were carried on 80 specimens consisting of a cylinder of acrylic resin into which a single tooth is inserted. An ad hoc metallic frame ...

Background: Silicosis is one of the oldest recorded occupational lung diseases, known since the time of Hippocrates and the ancient Egypt. It is an untreatable illness characterised by irreversible and progressive fibrotic reaction in the lung tissue caused by inhaling silica dust crystals with aereodynamic diameters of 0.5-5.0 micron diameter. It is a significant cause of mortality in the deve...