A mechanistic model was developed for predicting carbon dioxide corrosion rates of carbon steel pipes in multiphase flow conditions. The model incorporates the chemistry, thermodynamics of carbon dioxide dissolution, multiphase mass transfer, electrochemical kinetics on the metal surface and the presence of a corrosion product film. The predicted corrosion rates show good agreement with the exp...

Corrosion is explained as metal or alloy changes by chemical or electrochemical process or physical changes because of environmental effects. Corrosion occurs with oxidation and reduction reactions. In this study, Some general informations were given in the introduction section. And then, monomer synthesis, conducting polymers, nanocomposites, copolymers, and applications of corrosion protectio...

The self-assembled monolayer (SAM) was prepared using octadecyl trichlorosilane (OTS) in distilled solution on the copper surface. The effect of inhibitor concentration on the rate of inhibition efficiency and corrosion rate in corrosion medium on copper by using polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM) was studied. The results showed...

The corrosion of reinforcements induced by chloride has resulted to be one of the most frequent causes of their premature damage. Most corrosion sensors were designed to monitor corrosion state in concrete, such as Anode-Ladder-System and Corrowatch System, which are widely used to monitor chloride ingress in marine concrete. However, the monitoring principle of these corrosion sensors is based...

A survey and review of recent patents on electrochemical methods for corrosion monitoring from 1999 to 2009 are presented in this paper. The patents were classified into 4 groups according to different electrochemical theories, which are potential, polarization, electrochemical impedance and electrochemical noise. A future outlook of the development on new research aspects particularly on metho...

Corrosion is the process of degradation or failure of a material resulting from a chemical reaction between the material and its surrounding environment. It is an indispensible research area in material science and engineering, because corrosion resistance characterizes the stability or durability of a material, which is one of the most important material performances in application. Compared w...

Plant extracts are extensively researched as a source of green corrosion inhibitors. Herein, we report on a highly efficient and thermally stable corrosion inhibitor from the stem extract of high-altitude shrub Berberis aristata. The corrosion inhibition efficiency (IE) of the extract was tested in 1.0 M H2SO4 for the corrosion protection of mild steel (MS) by using gravimetric and electrochemi...

In this study, the corrosion behavior of Mg-Zn-Se and Mg-Zn-Cu alloys was investigated to evaluate their corrosion behavior related to use as implantable biomaterials. The corrosion behavior of these alloys and a commercially available Mg-Zn alloy were examined using static solution electrochemical testing, dynamic solution gravimetric testing, ion leaching testing, and microscopic evaluation. ...

A new coumarin derivative, N,N'-((2E,2'E)-2,2'-(1,4-phenylenebis (methanylylidene))bis(hydrazinecarbonothioyl))bis(2-oxo-2H-chromene-3-carboxamide) PMBH, was synthesized and its chemical structure was elucidated and confirmed using spectroscopic techniques (Infrared spectroscopy IR, Proton nuclear magnetic resonance, 1H-NMR and carbon-13 nuclear magnetic resonance 13C-NMR). The corrosion inhibi...