INTRODUCTION: Finite element (FE) models for predicting proximal femoral fracture load are useful for research related to the prevention of hip fracture. CT scan-based non-linear FE models have been shown to predict proximal femoral fracture load precisely in vitro. However, if these models are to be used in vivo, we need to know the effect of using CT scan data obtained in situ instead of in v...

BACKGROUND Among the millions of people suffering from a hip fracture each year, 20% may sustain a contralateral hip fracture within 5 years with an associated mortality risk increase reaching 64% in the 5 following years. In this context, we performed a biomechanical study to assess the performance of a hip fracture preventing implant. METHODS The implant consists of two interlocking peek ro...

In the present paper, fracture mechanisms and corresponding stress distributions in aluminium cast alloy locally reinforced by SiC particles and Al2O3 whiskers under monotonic and cyclic load are investigated experimentally and numerically. The material is monotonically and cyclically deformed to failure at room temperature. The fracture origin and the fracture path are investigated on the frac...

Objective In this study, marginal and internal misfit and fracture load with and without thermal-mechanical aging (TMA) of monolithic ZLS and lithium disilicate (LDS) crowns were evaluated. Material and methods Crowns were milled using a computer-aided design/computer-aided manufacturing system. Marginal gaps (MGs), absolute marginal discrepancy (AMD), axial gaps, and occlusal gaps were measu...

Background. Fracture load of implant-supported restorations is an important factor in clinical success. This study evaluated the effect of two techniques for screw access hole preparation on the fracture load of cement-screw-retained implant-supported zirconia-based crowns. Methods. Thirty similar cement-screw-retained implant-supported zirconia-based maxillary central incisor crowns were evalu...

magnesium alloys in liquid-phase condition form surface oxide films due to their high rate of oxidation. oxide films enter the melt as a result of surface turbulence, and remain inside the workpiece after solidification. the incoherent nature of their interface causes decreases in mechanical properties and reliability of castings. the effect of critical velocity and greater velocities of enteri...

The acoustic emission of fracture precursors is measured in heterogeneous materials. The statistical behaviour of these precursors is studied as a function of the load features and the geometry. We find that the time interval δt between events (precursors) and events energies ε are power law distributed and that the exponents of these power laws depend on the load history and on the material. I...

PURPOSE To investigate the effect of reducing tooth preparation and ceramic thickness on fracture resistance of lithium disilicate crowns. MATERIALS AND METHODS Specimen preparation included a standard complete crown preparation of a typodont mandibular left first molar with an occlusal reduction of 2 mm, proximal/axial wall reduction of 1.5 mm, and 1.0 mm deep chamfer (Group A). Another typo...

This letter describes a newly discovered phenomenon: ductile fracture in cementitious materials. The brittle nature of materials such as concrete and ceramics has prompted the development of various approaches to enhance their fracture toughness. Fibre reinforcement has been the common focus in the toughening of the brittle materials. Two types of fracture have been observed to date in cementit...