This paper studies the nonlinear vibration analysis of a simply supported Euler-Bernoulli beam resting on a nonlinear elastic foundation under compressive axial load using nonlinear normal modes concept in the case of three-to-one (3:1) internal resonance. The beam’s governing nonlinear PDE of motion and also its boundary conditions are derived and then solved using the method of Multiple Time ...

This paper studies mechanical buckling of functionally graded beams subjected to axial compressive load that is simply supported at both ends lies on a continuous elastic foundation. The displacement field of beam is assumed based on EngesserTimoshenko beam theory. Applying the Hamilton's principle, the equilibrium equation is established. The influences of dimensionless geometrical parameter, ...

The work described herein consists of experimental measurement of the post-impact buckling loads of Eglass/epoxy laminates. Composite samples with stacking sequence of [+45/45/90/0]2s were subjected to low-velocity impact loading at energy levels of 36, 56.13, 79.95, 110.31 and 144 J. The impact tests were conducted with a specially developed vertical drop weight testing machine. Impact parame...

Stability of functionally graded beams with piezoelectric layers subjected to axial compressive load that is simply supported at both ends is studied in this paper. The displacement field of beam is assumed based on first order shear deformation beam theory. Applying the Hamilton's principle, the governing equation is established. The influences of applied voltage, dimensionless geometrical par...

Thermal stress, wear and material damage produce effects of high-cycle fatigue failures in aircraft engines. The loading configuration on turbine blades of aircraft engines consists of an axial load. The axial load is the centrifugal force combined with the tensile and compressive loads, caused by the natural vibrations of the blades themselves. Low-cycle fatigue and high-cycle fatigue loading ...

This paper presents a two-degree-of-freedom analytical model for the electromechanical response of double ended tuning fork (DETF) force sensors. The model describes the mechanical interaction between the tines and allows investigation of the effect of a number of asymmetries, in tine stiffness, mass, electromechanical parameters and load sharing between the tines. These asymmetries are introdu...

the collapse of a compression member gives rise to decrease of the load carrying capacity of the member. to perform a nonlinear analysis, in addition to the precritical behavior, the post-critical behavior of the compression member also must be determined. in this study, because of certain advantages of the finite element method, this method has been selected to evaluate the axial load-axial di...

In some simple two-dimensional structures it is sufficient to determine only the lowest value of the load at which buckling commences. However, in the case of shells, it may be also necessary to investigate the postbuckling behavior because it has an important bearing on the magnitude of the failure load. The importance of the postbuckling behavior, which the small deflection theory of buckling...

BACKGROUND Lateral column tibial plateau fracture fixation with a locking screw plate has higher mechanical stability than other fixation methods. The objectives of the present study were to introduce two newly designed locking anatomic plates for lateral tibial plateau fracture and to demonstrate their characteristics of the fixation complexes under the axial loads. METHODS Three different 3...

the load transfer mechanisms of cable bolts differ from those for normal rebar bolts. the cable bolts used in mines are basically steel strands with different constructions depending on the number of wires or elements and the way they are laid. tendon bolts (rebar and cable) are normally evaluated for their strength and load transfer properties. the tendon strength can be evaluated by the tensi...