Non-destructive testing of the root area of a low-pressure (LP) turbine's blades and disks was performed in a restrictive manner. When the turbine blades and disks were disassembled or not, the root area surface was examined by conventional ultrasonic testing (UT), that is, magnetic particle or liquid penetrant testing. Recent developments have led to the use of phased array ultrasonic testing ...

The blades of a vertical axis wind turbine (VAWT) rotor see an inconsistent angle of attack through its rotation. Consequently, VAWT blades generally use symmetrical aerofoils with a lower lift-to-drag ratio than cambered aerofoils tailored to maximise horizontal axis wind turbine rotor performance. This paper considers the feasibility of circulation controlled (CC) VAWT blades, using a tangent...

Sandwich structures with thin, strong skin layers on both sides of a thick, compliant and light core combine low weight, high bending stiffness, high strength and high buckling resistance. These structures find use in many applications such as aircraft, marine applications and wind turbine blades. When used for wind turbine blades the sandwich structures are mainly made from FRP laminate skins ...

This paper briefly describes the implementation of a coupled near and far wake model for wind turbine rotor induction in the aeroelastic code HAWC2 and its application for flutter analysis of the NREL 5 MW wind turbine. The model consists of a far wake part based on Blade Element Momentum (BEM) theory, which is coupled with Beddoes’ near wake model for trailed vorticity. The first part of this ...

Wind energy is one of the clean renewable energy. However, the low frequency (20-200HZ) noise generated from the wind turbine blades, which bothers the residents, becomes the major problem to be developed. It is useful for predicting the aerodynamic noise by flow field and pressure distribution analysis on the wind turbine blades. Therefore, the main objective of this study is to use different ...

Article history: Received: 14.06.2016. Received in revised form: 01.12.2016. Accepted: 06.12.2016. Turbochargers have become widely applied to diesel vehicle engines. The mixed flow turbine type is suitable for systems where compact power sources are required with higher boost pressure. The sensitivity of the rotor to incidence effects and tendency of the flow to separate have given rise to con...

Thermal stress, wear and material damage produce effects of high-cycle fatigue failures in aircraft engines. The loading configuration on turbine blades of aircraft engines consists of an axial load. The axial load is the centrifugal force combined with the tensile and compressive loads, caused by the natural vibrations of the blades themselves. Low-cycle fatigue and high-cycle fatigue loading ...

The boiler drum level control unit is one of the main parameter in the thermal power station. Currently the boiler drum parameters are monitored only by using MATLAB software. There is no automatic control available. In the proposed system the boiler drum parameters such as temperature level, pressure level, water level and Droplet identifier are measured and controlled by using embedded proces...

Nowadays, the challenge in hydraulic turbine design is the multi-objective design of turbine runner to reach higher efficiency. The hydraulic performance of a turbine is strictly depends on runner blades shape. The present paper focuses on the application of the multi-objective optimization algorithm to the design of a small Francis turbine runner. The optimization exercise focuses on the effic...

Turbulent wake of wind turbine will reduce the power output of wind farm. The access to real turbulent wake of wind turbine blades with different spatial and temporal scales is provided by the pulsed Coherent Doppler Lidar (CDL) which operates by transmitting a laser beam and detecting the radiation backscattered by atmospheric aerosol particles. In this paper, the authors discuss the possibili...