A laser beam oscillation method using Galvano mirrors, which allows wide weld beads and controls thermal stress distribution, was suggested to suppress the formation of solidification cracks in welds. In order understand cracking behavior relation bead shape, welding performed under various widths frequency conditions. To evaluate effect parameter on susceptibility, a regression analysis based ...

Abstract — The Ethylene production process is one of the most important aspects of a petrochemical plant. The bulk of the worldwide annual commercial production of Ethylene is based on thermal cracking of petroleum hydrocarbons with steam. This process is commonly called Steam cracking process. This article deals with Amir Kabir Petrochemical Olefin Furnaces that are located in special region o...

A typical operating temperature of a solid oxide fuel cell (SOFC) is quite high above 750 °C and affects the thermomechanical behavior of the cell. Thermal stresses may cause microstructural instability and sub-critical cracking. Therefore, a joint analysis by the computational fluid dynamics (CFD) and computational structural mechanics based on the finite element method (FEM) was carried out t...

Analyses of the effects of service conditions on the distribution of residual stresses in railroad commuter car wheels are presented. Novel software has been applied to estimate the effects of service conditions on the as-manufactured state of these wheels. Contact loads resulting from wheel and rail interaction and thermal loads from on-tread braking are considered. Results indicate that conta...

In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...

The pressure plate will be cracking, erasing, and deformation as a result of reduced ability of clutch during the working process. The dynamic model of the vehicle when it started and the CFD model of pressure plate have been established. A new method which can be used to calculate the heat flux and the heat transfer coefficient has been proposed when after anglicizing the model. A simulation a...

The cracking and delamination of TiN-coated hardmetals (WC-Co cemented carbides) when subjected to Brale indentation were studied. Experimental variables were substrate microstructure related to low (6%wt. Co) and medium (13%wt. Co) binder content, and surface finishes associated with grinding and polishing stages before film deposition. Brale indentation tests were conducted on both coated and...

Tensile stress develops in concrete when shrinkage deformations and restraints (internal or external) exist. Utilization of appropriate creep or relaxation functions is crucial for assessing stress and the associated cracking potential in concrete, especially at early ages when chemical and physical properties change rapidly. The existing models, developed either from compressive creep tests or...