The method of magnetic flux leakage (MFL) is widely used for examination of pipeline wall to detect the presence of internal and external stress-corrosion. Magnetic scanner in which the MFL method is realized provides the pipe wall material magnetization, after magnetization the MFL is registered by magnetic field sensors. The stress-corrosion defects present in the pipeline wall are detected b...

A series of 18 Ni (300 grade) maraging steels of overall commercial purity but containing also deliberate impurity additions of sulphur, phosphorus, carbon, chromium and silicon + manganese has been studied. The fracture toughness and stress-corrosion resistance (determined using planestrain fatigue-precracked specimens tested in 3. 5% sodium chloride solution) of these steels have been compare...

The magnetic flux leakage (MFL) method is used for in-line inspection of oil and gas pipelines. Corrosion-induced MFL signals are sensitive to the level of stress and magnetic flux density existing in the pipe wall. Defects act as stress raisers, locally influencing the magnetization of the material, and subsequently the path of flux flow. Two adjacent corrosion pits can furthermore complicate ...

magnesium alloys as biodegradable materials can be used in body as an implant materials but since they have poor corrosion resistance, it is required to decrease their corrosion rate by biocompatible coatings. in this study, hydroxyapatite (ha) coatings in the presence of an intermediate layer of zrn as a biocompatible material, deposited on az91 magnesium alloy by ion beam sputtering method at...

Environmentally dependent subcritical crack growth, or stress-corrosion cracking, along ceramic-metal interfaces is studied for the silica glass-copper system. Tests were conducted in various gaseous and liquid environments in order to determine their relative effects on stress-corrosion cracking and to gain some insight into the mechanisms that control interfacial crack growth. In agreement wi...

Original scientific paper The paper deals with the effect of roughness, residual stresses and pitting corrosion on different shot peened (SP) ENAW 7075 aluminium alloy in different states. Suitable residual stress profile increases the applicability and life cycle of mechanical parts, treated by shot peening. Pitting corrosion has a major influence on aging of structural elements made of high s...

Stress corrosion experiments were performed on unidirectional ECR-glass/polymer composites with the modified polyester, epoxy and vinyl ester resins for the use in high voltage composite insulator applications. Two types of ECR-glass fibers with low and high seed counts were investigated. The stress corrosion tests were performed in nitric acid under four point bending conditions and the resist...

In this work, the effects of loading condition and corrosion solution on the corrosion fatigue behavior of smooth steel wire were discussed. The results of polarization curves and weight loss curves showed that the corrosion of steel wire in acid solution was more severe than that in neutral and alkaline solutions. With the extension of immersion time in acid solution, the cathodic reaction of ...

Tarnishing, corrosion and stress corrosion cracking (SeC) of gold alloys are related phenomena. They present problems when they occur in gold jewellery, dental gold alloys and electronic devices. They are exploited, however, in the depletion gilding and finishing of gold jewellery; and in the extraction, refining and fire assaying of gold. There is still much that is not known about these pheno...

Corrosion is the process of degradation or failure of a material resulting from a chemical reaction between the material and its surrounding environment. It is an indispensible research area in material science and engineering, because corrosion resistance characterizes the stability or durability of a material, which is one of the most important material performances in application. Compared w...