the flow stress of steel depends significantly on microstructural changes taken place during hot deformation processes. in hot deformation processes, the flow stress of steel is influenced by two main metallurgical phenomena, i.e. recovery and recrystallization, along with its chemical composition and thermo-mechanical parameters. the final mechanical properties of steel are also determined by ...

The formation of precipitates during thermal processing of microalloyed steels greatly influences their mechanical properties. Precipitation behavior varies with steel composition and temperature history and can lead to beneficial grain refinement or detrimental transverse surface cracks. This work presents an efficient computational model of equilibrium precipitation of oxides, sulfides, nitri...

In the present investigation, non-recrystallization temperature (TNR) of niobium-microalloyed steel is determined to plan rolling schedules for obtaining desired properties steel. The value TNR based on both alloying elements and deformation parameters. literature, equations have been developed utilized. However, each equation has certain limitations which constrain its applicability. This stud...

Fatigue is the primary cause of failure of crankshafts in internal combustion engines. The cyclic loading conditions and the stress concentrations in the crank pin fillets are unavoidable, and can result in fatigue failure. The objectives of this study were to compare the fatigue behavior of forged steel and ductile iron crankshafts from a one-cylinder engine as well as to determine if the fati...

The effects of tungsten (W) additions (0, 0.1, 0.5 and 1 wt.%) on the hydrogen embrittlement behaviour of microalloyed steels were systematically investigated by means of slow strain rate tests on circumferentially notched cylindrical specimens, and the mechanism of hydrogen-induced embrittlement was discussed. W addition is found to increase the activation energy of hydrogen desorption. Micros...

Cast steel nodes are being increasingly popular in steel structure joint application as their advanced mechanical performances and flexible forms. This kind of joints improves the structural antifatigue capability observably and is expected to be widely used in the structures with fatigue loadings. Cast steel node joint consists of two parts: casting itself and the welds between the node and th...

Strip casting is an emerging technology for flat products; it is based on the concept of near-net shape casting; it holds potential for substantial energy saving and reduction in environmentally undesirable emission. In conventional thermo-mechanical processing, the pinning pressure due to the effects of Nb and NbC on boundary mobility is used to advantage to retard static recrystallisation and...

−− An experimental study on solidification structure development and on endogenous inclusion precipitation in a continuously cast resulphurised steel is presented. Results were obtained by investigating two heats of a free cutting C-Mn steel cast in billets with a diameter of 145 mm. The as cast structure was evaluated by macroand microscopic analyses. Primary and secondary dendrite arm spacing...

The 25Cr-35Ni heat resistant steel has been widely used when resistance to oxidation and creep rapture at elevated temperatures is required. In this paper, the microstructural effect on the weldability of this alloy is investigated. The results of this study indicate that this steel has a perfect weldability in the as cast condition but does not possess good weldability in the aged condition. T...

The 25Cr-35Ni heat resistant steel has been widely used when resistance to oxidation and creep rapture at elevated temperatures is required. In this paper, the microstructural effect on the weldability of this alloy is investigated. The results of this study indicate that this steel has a perfect weldability in the as cast condition but does not possess good weldability in the aged condition. T...