High strength aluminium alloys are widely employed in aerospace applications. However specific environmental conditions may trigger corrosion and therefore these alloys require additional protection. Most current conversion coatings used for this purpose are Cr(VI) based, and thus environmentally undesirable. A possible replacement is a Ti based coating, Nabutan STI/310. The aim of this work is...

Surface modification techniques have been applied to generate titanium implant surfaces that promote osseointegration for use in dental applications. In this study, strontium-doped brushite coatings were deposited on titanium by electrochemical deposition. The phase composition of the coating was investigated by energy dispersive X-ray spectroscopy and X-ray diffraction. The surface morphologie...

The effect of an electroless Ni-Cu-P coating on the fatigue behavior of quenched and tempered CK45 steel has been investigated. The fatigue tests under rotating bending conditions have been conducted in three different conditions of uncoated, as-deposited and shot peened prior to the coating deposition. The results indicate that plating of the base steel leads to a fatigue life reduction. The d...

We have investigated features of liquid crystalline materials for organic polycrystalline field effect transistors (OFETs) with a model liquid crystalline material of 5,5”-dioctylterthiophene (8-TTP-8). Bulk mobility in polycrystalline thin films of 8-TTP-8 via its liquid crystalline phase was easily determined by time-of-flight experiments. Furthermore, we could evaluate impurity contamination...

Hydroxyapatite (HA) coatings are applied widely to enhance the level of osteointegration onto orthopedic implants. Atmospheric plasma spray (APS) is typically used for the deposition of these coatings; however, HA crystalline changes regularly occur during this high-thermal process. This article reports on the evaluation of a novel low-temperature (<47°C) HA deposition technique, called CoBlast...

The amorphous AlTiCrFeMoSi high entropy alloy (HEA) coating with hardness (11.88 GPa) is successfully deposited on T91 substrate by the magnetron sputtering method. Both steel and as−deposited samples are exposed to a static liquid lead−bismuth eutectic (LBE) at 550 °C for up 2000 h. exhibits excellent corrosion resistance against compared uncoated steel. results show that HEA has great potenti...

Highly transparent and luminescent CaMoO4:Eu/Ag composite films were fabricated on glass substrates as multifunctional antireflective (AR) coatings. The films were deposited through a combination of a sol–gel dip-coating technique and a hot water treatment. With the addition of an aluminum source in coating solutions, the sol–gel-derived films underwent a remarkable microstructural change durin...

In previous study, dense and homogenous 20wt% HAP/Ti composite coatings were successfully deposited on Ti substrates by cold gas dynamic spray technique. The results revealed that the phase composition of the HAP in the deposit is identical to that of the precursor powder and the bonding strength of the deposit is comparable/better to that of the plasma sprayed HAP. A relatively higher corrosio...

This study investigated the effects of deposition techniques on the microstructural and tribological properties of Ti/TiN/TiCN/TiAlN multilayer coatings onto a Custom 450 steel substrate. The coatings were produced using cathodic arc physical vapor deposition (CAPVD) and plasma-assisted chemical vapor deposition (PACVD). The microstructural of the coatings was evaluated using (SEM), and phase f...