microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. in this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and zr content. the results show that after homogenization, variations in thickness have no effect on the hardness. also, after hea...

Steels with regulated austenitic transformation during exploitation (RATE) are a new class of ferritic-based tungsten-free tool steels for hot forming. The study obtained quantitative data on the high-temperature strength RATE steel composition after quenching and tempering. stress-strain curves plotted tendency to strain hardening at temperatures 450 750 °C is estimated. It was established tha...

Large diameter steel line pipes are generally produced by cold deforming hot rolled or thermomechanically controlled rolled (TMCR) plate by the three-stage 'UOE' process. Pipe strength has been found to increase or decrease relative to the plate, depending on the steel grade and plate processing history. The strength increase is due to work hardening whereas any decrease in strength arises from...

THE REACTION between liquid zinc and steel, such as occurs during hot-dip galvanizing, shows some unusual kinetic features which as yet have not found a completely satisfactory explanation. The upon recent results from the in our laboratory. The main kinetic features (a) For silicon-free steels the purpose of this note is to present a mechanism based literature and some preliminary experiments ...

One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...

The current work was carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials; the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steels 310. Of the two joints involved, this paper describes the choice of welding consumables for the...