The present work demonstrates that friction stir welding (FSW) is a feasible route for joining 6061 aluminium (Al) alloy to AISI 1018 steel. The weld has a good weld quality and is free of cracks and porosity. The tensile failure happened at the boundary between the nugget and thermomechanically affected zone of the base Al alloy, indicating that the weld has a higher joining strength. Despite ...

Aluminum and iron oxides have been often used in the coagulation processes during water purification due to their unique surface properties toward anions. In the presence of silica, the coprecipitation of Al/Si or Fe/Si might decrease the efficiency of wastewater purification and reuse. In this study, surface properties and molecular structures of Al/Si and Fe/Si coprecipitates were characteriz...

A precipitation study was carried out during the isothermal aging at 850 °C for Fe-10at.%Ni-15at.%Al, Fe-10at.%Ni-15at.%Al-2.5at.%Cu and Fe-10at.%Ni-15at.%Al-5at.%Cu alloys. The experimental, Calphad, Kinetic/Precipitation calculated results indicated that Cu-addition to ternary alloy promoted a higher volume fraction of β´precipitates, which caused better response Cu-containing coarsening resi...

In the present study, nanocrystalline Ni50Al50-xMox (X = 0, 0.5, 1, 2.5, 5) intermetallic compound was produced through mechanical alloying of nickel, aluminum, and molybdenum powders. AlNi compounds with good and attractive properties such as high melting point, high strength to weight ratio and high corrosion resistance especially at high temperatures have attracted the attention of many rese...

The application of the subhalide reaction to Al refining has recently been a subject of increasing concern as a process to obtain pure Al from crude Al alloys. In this process, the ternary Al-Si-Fe alloy containing various amounts of Si and Fe which is produced(1)-(3) by the direct reduction of bauxite or alumina-bearing ores is used as the raw material. Therefore, on obtaining pure Al from Al-...

We present an x-ray magnetic circular dichroism XMCD study performed at the R L2 edge in RAl2 and RT2 T=Fe,Co intermetallic compounds. By analyzing the modification of the XMCD spectra as both the rare earth and the alloyed element Al, Fe, or Co are changed in the compound, an extra contribution, XMCDT, has been identified and undoubtedly associated with the R 5d -T 3d hybridization in Fe and C...

Herein, the influence of Cr additions on solidification parameters, as-cast microstructures, and mechanical properties Al–Si alloys with Fe-impurity is investigated. Al–Si–Cr 3% 7% Si 0.25% 0.40% are developed. Solidification experiments performed using an instrumented cooling casting apparatus permitting obtainment vertical upward-solidified ingots. The morphological phase structures character...