Chromium oxide coatings are chemically inert, have high mechanical strength, hardness and good optical characteristics; therefore, they have been widely used in many applications including corrosion protection, wear resistance, electronics, and optics. Cr2O3 is well suited for wear resistance applications, as it is one of the hardest oxides with 29.5 GPa hardness. Several deposition techniques ...

In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...

The increasing demand on high quality optical systems with complex geometries, low tolerances and a low installation space necessitates new replicative production systems for complex optical glass elements. The technology precision blank moulding shows promising properties to comply with these demands on an industrial bulk production. Due to the required high surface quality and low surface rou...

In this work, modified silicone tie-paints were prepared in a simple way for securing adhesion between the epoxy anticorrosive primer and fouling release coating. Hydroxy-terminated polydimethylsiloxane (PDMS) mixture containing fillers accessory ingredient was as base component. N-(2-Aminoethyl)-3-aminopropyltrimethoxysilane (DAMO) mechanically mixed with other functional additives curing ATR-...

In this research work, an experimental evaluation was conducted to explore the fretting fatigue life of multilayer Cr–CrN-coated AL7075-T6 alloy specimens with higher adhesion strength to substrate as the coating adhesion strength is one of the most critical issues in magnetron sputtering technique. Physical vapor deposition (PVD) magnetron sputtering technique was used for coating purpose, and...

Increased competition on the tissue market forces tissue makers to continuously raise their product quality and increase their operating efficiency. The creping process and the conditions on the Yankee cylinder are the key factors in the production process and they therefore need to be kept under good control in order to maintain a high and uniform quality. Due to evaporation, dissolved substan...

A tensile mechanical test suitable to measure the adhesion between brittle coatings and ductile substrates was applied to measure the adhesion of painted layers on polypropylene blends. The test involves the tensile deformation of the painted assembly, resulting in the periodic cracking of the brittle coating on the ductile substrate. The interfacial shear strength was determined by measuring t...

The biocompatibility of cardiovascular devices has always been considered crucial for their clinical efficacy. Therefore, a biofunctional coating composed of Type IV collagen (CoIV) and hyaluronan (HA) was previously fabricated onto the titanium (Ti) substrate for the application of promoting vascular smooth muscle cell contractile phenotype and improving surface endothelialization. However, th...

Titanium is widely used as a bone implant material due to its biocompatibility and high resilience. Since its Young's modulus differs from bone tissue, the resulting "stress shielding" could lead to scaffold loosening. However, by using a scaffold-shaped geometry, the Young's modulus can be adjusted. Also, a porous geometry enables vascularisation and bone ingrowth inside the implant itself. Ad...

The adhesion between poly(dimethylsiloxane) (PDMS) hemispheres coated with layer-by-layer (LbL) assemblies of polyelectrolytes and rigid, planar substrates was investigated using Johnson, Kendall, and Roberts (JKR) contact mechanics. Measurements were performed against amine-functionalized glass slides both in air and in aqueous solutions of controlled pH. Despite the increased density of negat...