Tetraethoxy orthosilicate (TEOS) was used not only as a precursor of silica, but also as an agent which reinforces the skeleton of silica-gel to prepare an aerogel and resultant silica and silica-alumina with large pore size and pore volume. In this gel skeletal reinforcement, the strength of silica aerogel skeleton was enhanced by aging with TEOS/2-propanol mixed solution to prevent the shrink...

Microwave assisted combustion synthesis is used for fast and controlled processing of advanced ceramics. Single phase and sinter active nano crystalline alpha alumina powders were successfully synthesized by different fuel-to-oxidant molar ratios using aluminium nitrate as an oxidiser, glycine as a reducing agents and millipore water as a solvent by microwave assisted combustion synthesis. Ther...

Polycrystalline MFI zeolite membranes were prepared on α-alumina tubular support by hydrothermal treatments at 413 K. The synthesized zeolite membranes were characterized by XRD, SEM and single gas permeation. The influence of hydrothermal treatment steps and the calcination time on the zeolite layer formation were investigated. MFI zeolite membrane prepared by four subsequent hydrothermal ...

In the present work, a microchannel reactor for autothermal reforming of methanol using a synthesized catalyst porous alumina support-CuO/ZnO mixed with ZrO₂ sol washcoat has been developed and its fine structure and inner surface characterized. Experimentally, CuO/ZnO and alumina support with ZrO₂ sol washcoat catalyst (catalyst slurries) nanoparticles is the catalytically active component of ...

Ni-based catalysts supported on alumina derived from the pseudo-boehmite prepared by impregnation method were employed for catalytic dry reforming of methane reaction at temperature 550–750 °C. The effect calcination physicochemical properties such as Ni dispersion, reduction degree, nickel crystallite sizes, and metal–support interaction was investigated. characterization results show that inc...

Early age cracking in concrete is caused by a combination of the chemical and autogenous shrinkage exhaustion water pores during hydration cement phases. Generally, this process takes place first 72 h casting. The use supplementary cementitious materials (SCMs) can mitigate due to several factors, among them: dilution effect, provision extra nucleation sites high specific surface SCMs, increase...

Highly sinterable alumina nano-powders have been synthesized by a sol-gel combustion method with glycine asfuel. The preparation involved the thermal decomposition of a chelating agent (fuel)-nitrate gel and theformation of amorphous precursors. The nanopowders calcined at 1100°C were characterized by X-ray powderdiffraction (XRD) and Scanning Electron Microscopy (SEM). It was found that the ch...

In the present study, the gamma alumina (γ-Al2O3) nano powders have been prepared with addition of 1%mol Co using an aqueous sol-gel method at lower temperature than the pure gamma alumina. The synthesis process accomplished by partial hydrolysis of the aqueous solution of metallic ions Al3+ and Co2+, with ammonia. The Al(NO3)3.9H2O and Co(NO3)2.6H2O salts were used as cations sources. The obta...