نتایج جستجو برای: alloy plating

تعداد نتایج: 61267  

2000
Tohru Yamasaki

Nanocrystalline Ni-W alloys having both high ductility and high strength were produced by electrodeoisition. The plating bath for the electrodeposition contained nickel sulfate, citric acid, sodium tungstate and ammonium chloride, and was operated at various bath concentrations and conditions of electrolysis. The ductility and tensile strength of the deposited alloys are strongly influenced by ...

Journal: :Journal of the Surface Finishing Society of Japan 1994

Journal: :Journal of the Surface Finishing Society of Japan 1989

Journal: :Materials transactions 2022

In this study, with the aim of improving fatigue characteristics A7075 aluminum alloy, A7075-T6511 alloy rod specimens were plated electroless Ni–P different compositions, and evaluated by a rotary bending test. The strength specimen low-P type was higher than that un-plated specimen. However, high-P significantly lower specimen, medium-P also though extent not so significant. It speculated the...

2014
Brian A. Rosen Eliezer Gileadi Noam Eliaz

The effect of pulse electrodeposition parameters on the composition and microstructure of Ni–Re alloys were studied on a rotating cylinder electrode. Ni–Re alloys were deposited from a citrate bath where the nickel-to-rhenium ratio was 45:1. The composition of the deposited alloy was monitored by energy dispersive spectroscopy (EDS) and compared to a single component transport-based model descr...

Journal: :Dental materials journal 2003
Marie Koike Jack L Ferracane Hiroyuki Fujii Toru Okabe

A mercury plating technique was used to determine the phases forming on experimental Ag-Sn-Cu alloy powders (with and without Pd) exposed to electrolytically deposited mercury. Four series of alloy powders were made: a) 1.5% Pd with 10-14% Cu (CU series); b) 1.0% Pd with 10-14% Cu (1PD series); c) 1.5% Pd with different ratios of Ag3Sn (gamma) to Ag4Sn (beta) with 12% Cu (AGSN series); and d) 9...

2003
Irina Boguslavsky Peter Bush Mark Kwoka

The need to better understand whisker growth has dramatically increased as component suppliers convert from tin-lead (SnPb) finishes to Pb-free finishes of Sn and low-alloy-content Sn-based finishes. Whiskers are spontaneous growth of metal filaments emanating from the finish surface. The issues with whiskers are they may grow long enough to cause short circuiting or break off and interfere wit...

2010
M. F. Valencia García H. V. Martínez A. Morales Ortiz

This paper reports the -SiC particles surface modification by copper Electroless Plating (EP), as well as a morphological characterization of Al-Si reinforced composite obtained with such modified particles and consolidated by compoforging. The -SiC particles were obtained by thermal degradation of organic waste. The compoforging technique is a hybrid between the compocasting process and semi-s...

2005
F. M. F. Rhen M. D. Coey

Thick films of nearly equiatomic Co–Pt produced by electrodeposition into nanoporous membranes exhibit an isotropic magnetic phase with square hysteresis loops sMr /Ms=0.95d and coercivity of up to 1.3 T. The initial magnetization curve is characteristic of pinning-type magnets. The coercivity can be controlled by the choice of annealing temperature or alloy composition, which depends on the ch...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید