The present work has as main aim to make a small introduction about the types of steels, specially the ones used in the construction industry. This material is appreciated in construction due to its many advantages as strengths, resistance, adaptability and flexibility in design, durability, recyclability,...; even thou its also has week points like a low resistance to fire, weak against corros...

The boronizing of a tungsten heavy alloy containing Ni and Fe as the major alloying elements were performed in the present study to increase its surface hardening. Pack cementation method was employed as a well-known, successful solid-state process for boronizing. The coating treatment was accomplished at different temperatures of 1000, 1050 and 1100°C for 6 and 9 hours. The formation of tu...

PURPOSE Due to the current interest in MRI-guided radiotherapy, the magnetic properties of the materials commonly used in radiotherapy are becoming increasingly important. In this paper, measurement results for the magnetization (BH) curves of a range of sintered heavy tungsten alloys used in radiation shielding and collimation are presented. METHODS Sintered heavy tungsten alloys typically c...

The precipitation of tungsten nitride upon internal nitriding of ferritic Fe0.5 at.% W alloy was investigated at 610 °C in a flowing NH3/H2 gas mixture. Different tungsten nitrides developed successively; the thermodynamically stable hexagonal δ-WN could not be detected. The state of deformation of the surface plays an important role for the development of tungsten nitride at the surface. The m...

We use a multiscale approach to analyze adiabatic shear bands in a tungsten heavy alloy particulate composite deformed in plane strain tension at a nominal strain rate of 5000/s. Fifty IJ.m diameter circular tungsten particulates are assumed to be randomly distributed and perfectly bonded to the nickel-iron matrix. The volume fraction of particulates equals 50%. We first analyze transient coupl...

Binary transition metal dichalcogenide monolayers share common properties such as a direct optical bandgap, spin-orbit splittings of hundreds of meV, light-matter interaction dominated by robust excitons and coupled spin-valley states. Here we demonstrate spin-orbit-engineering in Mo(1-x)WxSe2 alloy monolayers for optoelectronics and applications based on spin- and valley-control. We probe the ...

Presented is a constitutive framework for modeling the dynamic response of polycrystalline microstructures, posed in a thermodynamically consistent manner and accounting for finite deformation, strain rate dependence of flow stress, thermal softening, thermal expansion, heat conduction, and thermoelastic coupling. Assumptions of linear and square-root dependencies, respectively, of the stored e...

Local loading conditions associated with shear banding formation in laboratory -@ten alloy specimens are examined. The specimens consist of compression specimens of large length to diameter ratio made of 91W-6Ni-3Co swaged tungsten alloys tested with the Hopkinson pressure bar and symmetric Taylor techniques. Experimental and numerical results provide insights on the effect of the hydrostatic p...