To achieve optimal mechanical properties in high manganese steels, the precipitation of nanoprecipitates of vanadium and niobium carbides is under investigation. It is shown that under controlled heat treatments between 850°C and 950°C following hot deformation, few-nanometre precipitates of either carbide can be produced in test steels with suitable contents of vanadium or niobium. The structu...

Forging dies at high temperatures are under contact pressure, variable mechanical loads and thermal shock, furthermore they should withstand wear and friction in a high level. So, in order to increase die life, the selection of die material, coating and hardness is essential. In this review, various methods used for die life enhancement such as carbide coating, using the super alloy stellite 6 ...

Small-angle neutron scattering (SANS) and neutron powder diffraction (ND) techniques were used to study quantitatively the effect of nano-sized precipitates and boron addition on the mechanical properties of low-carbon steels. SANS was used to evaluate nano-sized precipitates, smaller than about 600 A in diameter, and ND was used to determine the weight fraction of the cementite precipitates. F...

the main objective of this project was to investigate the behavior and the damaging effects of hot tear segregationsin the continuously cast steel blooms on the final product quality. to achieve this aim, plant data from three differenttypes of steels were used. investigations using the scanning electron microscope (sem) equipped with energydispersive x-ray spectroscopy (eds) probe and metallog...

Tool steels are a widely used material for construction of tools designated for shaping and forming of metal, plastic and other elements in mass production. These elements include extruding dies, pressure casting dies, moulds, punches and various other elements for plastic shaping of other materials preheated to temperatures in the range of 250-700 °C (Fig. 1). Since shape stability constitutes...