The importance of smooth mould filling in the foundry casting process has been recognized for a long time. More uniform the filling process is, the better the quality of the casting of the products produced. Successful computer simulations can help to reduce the number of trials and cut down the lead time in the design of new casting products by better understanding the complex mechanisms and i...

In the aluminum die casting process, erosion, corrosion, soldering, and die sticking have a significant influence on tool life and product quality. A number of coatings such as TiN, CrN, and (Cr,Al)N deposited by physical vapor deposition (PVD) have been employed to act as protective coatings due to their high hardness and chemical stability. In this study, the wear performance of two nanocompo...

This paper reports on the results of an investigation to minimize and control the distribution of porosity in edge-gated copper rotor die castings. A Flow 3-D computer modeling exercise was used to simulate shot profiles that result in formation of large pores in the end rings, as well as to predict improved profiles that will reduce or eliminate the residual porosity. These model results were ...

Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...

For die-casting, various approaches to finding the optimal control settings and optimal mold by using a computational fluid dynamics (CFD) simulator have recently been studied and applied. However, the optimal value obtained by using a conventional CFD simulator does not consistently agree with experiment, owing to computational error. Accordingly, we analyze the problem of optimization with a ...

Commercial, aluminum die-cast alloys are subject to long-term stresses leading to viscoelastic material responses resulting in inefficient engine operation and failure. Constant load creep tests were conducted on aluminum die-casting alloys: B-390, eutectic Al-Si and a 17% Si-Al alloys. Rupture occurred in the primary creep regime, with the eutectic alloy having the longest times to failure. Pr...

Non-destructive testing using ultrasonic measurement is used to ensure the quality of the die-casting products. The quality of a casting depends on the presence of discontinuities such as porosity and on the final metallurgical structure. Discontinuities occurring in the sub-surface of the cast structure mostly have irregular surfaces which scatter the ultrasound waves and make ultrasonic testi...