In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...

geometric and material nonlinear behavior of slender webs in i-column girders having stocky flanges under the action of combined lateral and axial loads is investigated. interaction curves corresponding to the application of compressive and shear loads at buckling and ultimate stages for both web plates and column sections are plotted. in addition, the effects of flange and web slenderness rati...

The risk of low back pain resulted from cyclic loadings is greater than that resulted from prolonged static postures. Disk degeneration results in degradation of disk solid structures and decrease of water contents, which is caused by activation of matrix digestive enzymes. The mechanical responses resulted from internal solid-fluid interactions of degenerative disks to cyclic loadings are not ...

Numerical modeling was carried out to investigate the responses of suction bucket foundations under vertical cyclic loading. Numerical results were compared with centrifuge experiment results. Before the capacity of the model suction bucket to resist cyclic loading could be investigated, the static pullout capacities had to be determined. The buckets with different aspect ratio are investigated...

BACKGROUND Treatment options for comminuted tibial shaft fractures include plating, intramedullary nailing, and external fixation. No biomechanical comparison between an interlocking tibia nail with external fixation by an Ilizarov frame has been reported to date. In the present study, we compared the fatigue behaviour of Ilizarov frames to interlocking intramedullary nails in a comminuted tibi...

in this study, a researching program is conducted by cyclic triaxial test to determine the post-cyclic behavior of bushehr carbonate sand retrieved from the north of the persian gulf, under anisotropic consolidation at 200 kpa confining pressure. the article compares the post-cyclic monotonic strength and excess pore water pressures generated after the test with the pre-cyclic monotonic results...

Considering economical reasons and attempting to reduce carbon foot print of concrete structures, there is increasing tendency toward use of high strength reinforcement in seismically active regions. ACI 318-19, Iranian steel rebars standard INSO 3132 and next edition of Iranian national building allow the use of high strength rebars in elements of ductile force resisting systems. Therefore it ...