Fast Green (FCF) dye is commonly used in both cytology and histology applications. Previous studies have found that it can cause mutagenic and tumorigenic effects in experimental human and animal populations. It can also be a source of skin, eye, respiratory, and digestive irritation. The purpose of this study was to examine the use of thin film membranes to degrade FCF. A thin film membrane of...

ZnO/Al2O3 multilayers were prepared by alternating atomic layer deposition (ALD) at 150°C using diethylzinc, trimethylaluminum, and water. The growth process, crystallinity, and electrical and optical properties of the multilayers were studied with a variety of the cycle ratios of ZnO and Al2O3 sublayers. Transparent conductive Al-doped ZnO films were prepared with the minimum resistivity of 2....

We report on the suitability of water-soluble non-polymeric electrospun cyclodextrin (CD) nanofiber templates by using atomic layer deposition (ALD) to yield metal oxide tubes. To demonstrate this, watersoluble electrospun CD nanofibers were chosen as template to produce metal oxide tubes where we have tested two examples of ALD coatings, namely, Al2O3 and ZnO. After the ALD coating on the CD n...

Estuarine and marine sediments are a probable end point for many engineered nanoparticles (ENPs) due to enhanced aggregation and sedimentation in marine waters, as well as uptake and deposition by suspension-feeding organisms on the seafloor. Benthic infaunal organisms living in sediments encounter relatively high concentrations of pollutants and may also suffer toxic effects of ENPs. We tested...

Nanosized CuO-CeO2, CuO-Fe2O3, CuO-CeO2-Al2O3 and CuO-Fe2O3-CeO2-Al2O3 were prepared by co-precipitation and wet impregnation techniques and were used for Catalytic decomposition of acetylene to produce carbon nanotubes (CNTs). Weight gain technique was used to follow up the catalytic reactions. The results revealed that catalyst chemical composition, catalytic temperature, acetylene flow rate ...

Renewable methanol, obtained from CO2 and hydrogen provided renewable energy, was proposed to close the loop. In industry, methanol synthesis using catalyst CuO/ZnO/Al2O3 occurs at a high pressure. We intend make certain modification on traditional work lower pressure, maintaining selectivity. Therefore, three heterogeneous catalysts were synthesized by coprecipitation improve activity selectiv...

Al-doped ZnO thin films were prepared on the (0001) sapphire (c-Al2O3) substrates by atomic layer deposition (ALD) using alternating pulses of Zn(C2H5)2, Al(CH3)3 and H2O precursors and post-deposition high-temperature annealing. Photoluminescence (PL) spectroscopy showed that the threshold of stimulated emission decreases with increasing Al concentration, from 49.2 kW/cm of the ZnO film to 12....

A series of CuO/ZnO/ZrO2 (CZZ) catalysts with different CuO/ZnO weight ratios have been synthesized by citrate method and tested in the catalytic hydrogenation of CO2 to methanol. Experimental results showed that the catalyst with the lowest CuO/ZnO weight ratio of 2/7 exhibited the best catalytic performance with a CO2 conversion of 32.9%, 45.8% methanol selectivity, and a process delivery of ...

We report the clearly observed tunneling magnetoresistance at 5 K in magnetic tunnel junctions with Co-doped ZnO as a bottom ferromagnetic electrode and Co as a top ferromagnetic electrode prepared by pulsed laser deposition. Spin-polarized electrons were injected from Co-doped ZnO to the crystallized Al2O3 and tunnelled through the amorphous Al2O3 barrier. Our studies demonstrate the spin pola...

Nano-metallic oxide particles have been found to be potentially effective microstructural reinforcements for cement mortar and become a research hotspot in recent years nano-modification technology of building materials. However, different conclusions obtained due various researchers used methods, which resulted deficiency the performance comparison between nano-metallic particles. In present s...