Sandstone formations are ubiquitous in both aquifers and petroleum reservoirs, of which clay is a major constituent. The release of clay particles from pore surfaces as a result of reduced injection fluid salinity can greatly modify the recovery of hydrocarbons from subsurface formations by shifting the wettability properties of the rock. In this paper we demonstrate a microfluidic approach whe...

Expansive soils owe their characteristics to the presence of swelling clay minerals. As they get wet, the clay minerals absorb water molecules and expand; conversely, as they dry they shrink, leaving large voids in the soil. Swelling clays can control the behavior of virtually any type of soil if the percentage of clay is more than about 5 percent by weight. Soils with smectite clay minerals, s...

The effect of fine particles on turbulence damping and reduction of flow friction coefficient in ribleted pipes, have been investigated experimentally. Tests have been conducted in a ribleted pipe with hydraulic diameter of 18.6 mm, and 20 stream wise riblets of 1.8 mm depth, along the pipe. Flows of water tap with Reynolds number from 5000 to 30000 were compared with flows containing silt-clay...

Clay, as a rock term, describes a soft, loose, earthy material containing particles with an average grain size of less than than 0.004 mm (4 mm) in the Wentworth grain size scale and less than 0.002 mm (2 mm) in most soil investigations. Clay is composed mostly of clay minerals, but may also contain quartz, feldspar, carbonates, ferruginous material, and other non-clay materials. All clays, apa...

– Microscopy observations show that suspensions of synthetic and natural nanolayered smectite clay particles submitted to a strong external electric field undergo a fast and extended structuring. This structuring results from the interaction between induced electric dipoles, and is only possible for particles with suitable polarization properties. Smectite clay colloids are observed to be parti...

in recent years many research works have been carried out on anti-corrosive nanocomposites coatings containing mineral reinforcements. the most important criteria in these attempts are polymerization method and the type of matrix and reinforcement of nanocomposites. in this regard, the physical and mechanical properties of the polymers in which a small amount of filler is used can be improved. ...

We test the common assumption that organic carbon (OC) storage occurs on sand-sized soil particles only after the OC storage capacity on silt- and clay-sized particles is saturated. Soil samples from a Brookston clay loam in Southwestern Ontario were analysed for the OC concentrations in bulk soil, and on the clay (<2 μm), silt (2-53 μm) and sand (53-2000 μm) particle size fractions. The OC con...