The punchless welding point detection system using laser diagnostics for continuous strip production line has been developed. At the entrance of the steel strip production line, the preceding and following coils are welded for continuous processing. The welding point detection and tracking of the position is essential for the setup change of various important processing facilities according to ...

The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...

Welding is an area in which technological developments out match the developments in its science base, which is primarily driven by the phenomenal industrial demand for welded structure. Reliability, Reproducibility and Viability requirements are forcing Technologists to look at weld defects such as distortion, hot cracking, in a systematic and logical approach than on adhoc basis. Distortion i...

Submerged Arc welding process is automated and semiautomated high deposition down hand welding process not vertical or over welding process, The fundamental difference of this welding process is that the Arc is not visible it is submerged into the flux. Weldment is fully submerged the heat loss is minimum and the thermal efficiency is very high up to 80-90%. A constant power sources and control...

This article proposes a novel method for analyzing residual stress and deformation in butt welding on 6 mm SUS304 stainless steel plates, using MSC.MARC, a commercial finite element method software, to find the best location for jig fixtures that will minimize welding deformation. Simulation and experimental studies show that a distance of 100 mm between the jig center and the welding bead cent...

Finite element (FE) simulation with inherent deformation is an ideal and practical computational approach for predicting welding stress and distortion in the production of complex aluminum alloy structures. In this study, based on the thermal elasto-plastic analysis, FE models of multi-pass butt welds and T-type fillet welds were investigated to obtain the inherent strain distribution in a 5A06...

Installation of new pipelines is predicted to grow at a rapid rate over the next twenty years, due in part to the increase use worldwide of combined cycle power generation plant using natural gas a fuel. The need to construct large diameter pipelines over long distances has led to an increased demand to improve the productivity of pipeline girth welding. Many novel techniques have been tried in...

This paper presents a study on optimization of process parameters using particle swarm optimization to minimize angular distortion in 202 grade stainless steel gas tungsten arc welded plates. Angular distortion is a major problem and most pronounced among different types of distortion in butt welded plates. The process control parameters chosen for the study are welding gun angle, welding speed...

Friction Stir Welding (FSW) is an innovative solid-state joining process, which is gaining a great deal of attention in several applicative sectors. The opportune definition of process parameters, i.e. minimizing residual stresses, is crucial to improve joint reliability in terms of static and dynamic performance. Longitudinal residual stresses, induced by FSW in AA2024-T3 butt joints, have bee...