A monoclinic zirconia coating with a nanostructural surface was prepared on the Ti-6Al-4V substrate by an atmospheric plasma-spraying technique, and its microstructure and composition, as well as mechanical and biological properties, were investigated to explore potential application as a bioactive coating on bone implants. X-ray diffraction, transmission electron microscopy, scanning electron ...

Partially stabilized zirconia (PSZ) agglomerate toughened alumina has been prepared by the "deflocculation-flocculation" technique, using 2 and 3 mol. % Y2O3-doped zirconia powders. Samples containing up to about 30 vol.% zirconia were obtained. The resulting microstructure seems to be mainly influenced by the physical properties of the starting powders, e.g. agglomerate size and the specific s...

in the current study, synthesis and characterization of a new nano-structured zirconium(iv)-minoxidil complex (1), where minoxidil, (c9h15n5o; 6-(1-piperidinyl)-2,4-pyrimidinediamine 3-oxide), have been investigated in two different solvents. the compound 1 has been synthesized by sonochemical method in the presence of methanol and monoethylene glycol (meg) as solvents and characterized by scan...

There is interest in using zirconia for biomedical applications as ball heads for total hip prostheses. Two potential types are under discussion: partially stabilized zirconia (PSZ) and tetragonal zirconia polycrystals (TZP) materials. Because of its enhanced material properties, TZP stabilized with yttria is favourable. To eliminate high amounts of natural radioactive impurities, the precursor...

A study was undertaken to evaluate the effect of artificial aging through steam and thermal treatment as influencing the shear bond strength between three different commercially available zirconia core materials, namely, Upcera, Ziecon, and Cercon, layered with VITA VM9 veneering ceramic using Universal Testing Machine. The mode of failure between zirconia and ceramic was further analyzed as ad...

The effect of CaO on the formation of β- and γ-zirconia nanoparticles from α-zirconia was investigated and their stability evaluated via mechanical activation. α-ZrO2+8.5wt%CaO powder was milled for 2-150 hours with ball-to-powder weight ratios (BPWR) of 40:1 and 60:1. Structural evaluations were conducted using X-Ray diffraction and scanning electron microscope (SEM). Thermal analysis wa...

It is acknowledged that cellular responses are highly affected by biomaterial porosity. The investigation of this effect is important for the development of implanted biomaterials that integrate with bone tissue. Zirconia and alumina ceramics exhibit outstanding mechanical properties and are among the most popular implant materials used in orthopedics, but few data exist regarding the effect of...

The correlation between density and specific surface area of ZrO2 nanoparticles (NPs) was studied. The NPs were produced using a hydrothermal process involving microwave heating. The material was annealed at 1100 °C which resulted in an increase in the average grain size of the ZrO2 NPs from 11 to 78 nm and a decrease in the specific surface area from 97 to 15 m(2)/g. At the same time, the dens...

The effect of CaO on the formation of β- and γ-zirconia nanoparticles from α-zirconia was investigated and their stability evaluated via mechanical activation. α-ZrO2+8.5wt%CaO powder was milled for 2-150 hours with ball-to-powder weight ratios (BPWR) of 40:1 and 60:1. Structural evaluations were conducted using X-Ray diffraction and scanning electron microscope (SEM). Thermal analysis wa...