radar absorbing materials, i.e. magnetite (fe3o4) coated carbon fibers (mccfs) were fabricated by electro-deposition technique. black-colored single spinel phase fe3o4 nanoparticles was easily synthesized by hydrothermal method using reduction of a fe (iii) - triethanolamine complex in an aqueous alkaline solution at 60-80 ◦c. uniform and compact fe3o4 films were fabricated on nitric acid treat...

Polyimides are widely used for the external surfaces of spacecraft. In low Earth orbit (LEO), they are exposed to atomic oxygen (AO) and to problems of electrostatic discharge (ESD). This work demonstrates that liquid-phase deposition (LPD) of titania creates a protective coating on Kapton polyimide that is effective in reducing AO-induced surface erosion and in preventing ESD. Adherent titania...

in this investigation, fluor-hydroxyapatite (fha) film was deposited on a titanium substrate by sol-gel method. triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol solutions were used respectively as p, f and ca precursors. typical apatite structures were obtained for all coatings after dipping and subsequent heat treatment at 550, 700 and 800 ºc, the coating layers were invest...

Multiple layers of polyvinyl alcohol (PVA) coating are generated onto silica gel by thermal immobilization to form a stationary phase applied for hydrophilic interaction liquid chromatography (HILIC). It offers an easy way to manipulate the thickness of PVA coating and the obtained stationary phase demonstrated high efficiency and high chemical stability.

in this paper, zno thin film is deposited on slide glass substrate using the sol-gel process. presenting well-defined orientation of zno thin films nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (mea), de-ionized water and isopropanol alcohol. the annealed zno thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....

The corrosion of galvanizing equipment parts by liquid zinc is an urgent problem that needs solving. In this work, FeB-30 wt.% Al0.25FeNiCoCr cermet coating was deposited on the surface 316L stainless steel AC-HVAF to protect from zinc. microstructures and phase compositions powders were determined SEM, EDS, XRD in detail. Additionally, microhardness, fracture toughness, abrasion wear resistanc...

the effect of an electroless ni-cu-p coating on the fatigue behavior of quenched and tempered ck45 steel has been investigated. the fatigue tests under rotating bending conditions have been conducted in three different conditions of uncoated, as-deposited and shot peened prior to the coating deposition. the results indicate that plating of the base steel leads to a fatigue life reduction. the d...

despite having some useful properties, stainless steels suffer from lack of suitable surface hardness. in this research electroless ni-b-tl coating was used with the aim to increase their surface hardness. the effects of nickel chloride, sodium borohydride, thallium nitrate and ethylendiamin on the chemical composition of coating were studied. to achieve an increase in hardness, the effects of ...