In this paper, the effect of fluidized bed temperature on primary fragmentation of Huadian oil shale was investigated experimentally in thermal state using a small-scale fluidized bed with N2 as fluidizing gas. The fluidized-bed temperatures changed from 600 °C to 1000 °C. Experimental results indicate that the fluidized bed temperature is an important factor of primary fragmentation of oil sha...

An accurate prediction of the minimum fluidization velocity is a crucial hydrodynamic aspect of the design of fluidized bed reactors. Common approaches for the prediction of the minimum fluidization velocities of binary-solid fluidized beds are first discussed here. The data of our own careful experimental investigation involving a binary-solid pair fluidized with water is presented. The effect...

The history of fluidized bed technology dates back 60 years. Gasification of pulverized coal in the Winkler process during the 1920's marked the beginning of fluidized bed application. Consider­ ,able work done during World War II by U.S. oil companies to improve the catalytic cracking of kerosene led to the development of the Fluid Catalytic Cracking process. Fluidized bed technology later exp...

Two-interconnected fluidized bed systems are widely used in various processes such as Fisher-Tropsch, hot gas desulfurization, CO2 capture-regeneration with dry sorbent, chemical-looping combustion, sorption enhanced steam methane reforming, chemical-looping hydrogen generation system, and so on. However, most of two-interconnected fluidized beds systems require riser and/or pneumatic transport...

the objective of this study was to examine the effects of the fluidized-bed drying me-thod on the final quality of two varieties of iranian rice, medium- and long grain. the re-sults were compared to that of paddy drying using a traditional method. rough rice was treated in the fluidized bed drier at 140ºc for 2 minutes. similar samples were dried for 8-10 hrs by the traditional method. dried s...

The objective of this work is to show a procedure for mesh generation in a fluidized bed using large eddy simulations (LES) of a filtered two-fluid model. The experimental data were obtained by [1] in a laboratory fluidized bed. Results show that it is possible to use mesh with less cells as compared to RANS turbulence model with granular kinetic theory flow (KTGF). Also, the numerical results ...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...

This paper focuses on the determination of the solid circulation of a CFB gasification system with a dual fluidized bed concept and the distribution of the solid hold up at different fluidization conditions. A mathematical model of the riser was designed and implemented in a model of a dual fluidized bed system. This model contains routines for calculation of each section of the dual fluidized ...

Fluidized bed was employed to investigate propane steam reforming over Ni-K/CeO2-Al2O3 catalyst. The catalyst was characterized by XRD, SEM, TG/DTA, and N2 adsorption-desorption tests. Effects of promoters, space velocity, temperature, and steam/propane (S/C) ratio on propane conversion, H2 yield, H2/CO ratio, and stability were studied and discussed. The experiments were carried out under cond...