We experimentally demonstrate the light focusing by negative refraction in a photonic crystal slab superlens at wavelengths lambda of 1.26-1.42 microm. The photonic crystal slab was fabricated on silicon-on-insulator substrate with an interface structure optimized for low reflection and diffraction losses. The light focusing in the photonic crystal slab was clearly observed through the intentio...

In Portland Cement Concrete (PCC) pavement of the roads, dowels bar transfers vehicle loading to the unloaded slab. Load Transfer Efficiency (LTE) is used to evaluate dowel bars in PCC pavement. This parameter is defined as the vertical displacement ratio of the loaded slab versus the unloaded slab. In this study, the impact of effective factors (friction coefficient between dowel and concrete ...

heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. a heat transfer and solidification model is described for the continuous casting of steel slabs. the model has been established on the basis of the technical conditions of the slab caster in the continuou...

Using terahertz spectroscopy, we measure the normal-incidence transmission coefficient of photonic crystals consisting of a periodic lattice of air holes in a silicon slab. Sharp resonant features are observed in the transmission spectra due to coupling of the leaky photonic crystal modes, called guided resonances, to the continuum of free-space modes. The resonances show considerable sensitivi...

We present new tomographic models of the Nazca slab under South America from 6°S to 32°S, and from 95 km to lower mantle (895 km) depths. By combining data from 14 separate networks in the central Andes, we use finite-frequency teleseismic P-wave tomography to image the Nazca slab from the upper mantle into the mantle transition zone (MTZ) and the uppermost lower mantle on a regional scale. Our...

In this study, a longitudinal joint connection was proposed for the short-span slab-type modular bridges with rapid construction. The slab-type modular bridge consists of a number of precast slab modules and has the joint connection between the modules in the longitudinal direction of the bridge. A finite element based parameter analysis was conducted to design the shape and the dimensions of t...

The problem of calculating transient heat transfer in concrete floor slabs is complicated due to ground coupling, which can require the numerical solution of two or three-dimensional transient conduction equations. This paper presents a simplified method for calculating transient slab-on-ground heat transfer that can be incorporated within hourly simulation programs. The method assumes that the...

Concrete slab with opening are usually designed with help of traditional rules of thumb proposed by building codes. Such methods however introduce limitations concerning size of opening and magnitude of applied loads. Furthermore there is a lack of sufficient information about the load carrying capacity of slab with opening. It is also difficult to model the complex behaviour of reinforced conc...

The objectives in this work were to develop, calibrate, and apply a model to predict ideal taper profiles down the narrow faces of the SIDERAR slab casting mold for several different casting speeds, steel grades, flux powder compositions, and widths. A significant amount of original research was undertaken for this challenging problem. A finite difference model of transient 1-D heat conduction ...

In engineering practice, slots of different shapes and orientations are made with a view to satisfy the functional requirements. The presence of slots increases the complexity of the analysis (by stress concentration) of structural members/elements. Studies have been commonly done on plain concrete slab with rectangular and circular opening, while only few studies have been done on slots of lar...