A novel two-stage pyrolysis-plasma/catalysis process has been developed for hydrogen production from waste biomass. Investigation into; the comparison of biopolymers, cellulose and lignin; effect Mg, Co, Ce, Cu, Fe Ni as promoter metals added to a Ni-Al2O3 catalyst; influence catalyst support material in relation was carried out. The combination plasma catalysis produced highest total gas yield...

M1-M2-N-C bimetallic catalysts with M1 as Fe and Co and M2 as Fe, Co, Ni and Mn were synthesized and investigated as cathode catalysts for oxygen reduction reaction (ORR). The catalysts were prepared by Sacrificial Support Method in which silica was the template and aminoantipyrine (AAPyr) was the organic precursor. The electro-catalytic properties of these catalysts were investigated by using ...

Many solar fuel generator designs involve illumination of a photoabsorber stack coated with a catalyst for the oxygen evolution reaction (OER). In this design, impinging light must pass through the catalyst layer before reaching the photoabsorber(s), and thus optical transmission is an important function of the OER catalyst layer. Many oxide catalysts, such as those containing elements Ni and C...

metalloporphirins; cu(tpp), mn(tpp)cl, co(tpp), fe(tpp)cl, zn(tpp) and mn(obp)cl catalyze region and chemoselective silylation of hydroxyl groups with hmds. fe(tpp)cl is the most effective catalyst and silylation occurs immediately in its presence at room temperature.

Optoelectronic properties of hematite (α-Fe2O3) as a photoanode and the required over-potential in photo-assisted water splitting has been improved by presence of Co-Pi on its surface. In order to increase the lifetime of the photogenerated holes and lower the applied bias, cobalt-phosphate (Co-Pi) on nanostructured α-Fe2O3 by electrodeposition was de...

A very efficient electrogenerated Fe(0) porphyrin catalyst was obtained by substituting in tetraphenylporphyrin two of the opposite phenyl rings by ortho-, ortho'-phenol groups while the other two are perfluorinated. It proves to be an excellent catalyst of the CO2-to-CO conversion as to selectivity (the CO faradaic yield is nearly quantitative), overpotential, and turnover frequency. Benchmark...

The intensive human activities in chemical industry and environmental purification urge the development of advanced protocols for green production and waste management. In environmental science, developing highly efficient and environmentally-friendly catalytic materials and systems are very favourable approaches to green chemical synthesis and remediation of contaminated air, soil, and wastewa...

The catalyst containing 80%Co/20%Ce/15wt%SiO2 was prepared using fusion procedure and studied for the conversion of synthesis gas to light olefins. The effect of a range of operating variables such as the pressure, temperature and H2/CO molar feed ratio on the catalytic performance of fused catalyst was investigated. It was found that the best operating conditions are H2/CO=2/1, T=350 ̊C and P=2...

In this work, a non-precious metal catalyst consisting of Co9S8 nanoparticles surrounded with nitrogen-doped graphene-like carbon (Co9S8-N-C) was developed for oxygen reduction in alkaline media. Improved activity has been measured with the Co9S8-N-C catalyst relative to Pt/C and a non-precious metal catalyst based on Fe instead of Co (Fe-N-C). An extensive physical characterization, including ...

In this paper, LaBO3 perovskite type catalyst formulations were prepared by sol-gel auto combustion method using citric acid as the fuel. Activity of catalysts was tested in catalytic oxidation of toluene as a model of volatile organic compounds. LaCoO3 perovskite formulation showed the highest activity among LaBO3 (Fe, Mn and Co) perovskite catalysts. So, LaCoO3 perovskite based catalyst was s...