a bioreactor equipped with hollow fiber microfiltration membranes was applied for wastewater treatment. removal of chemical oxygen demand (cod) and biochemical oxygen demand (bod5) was investigated. the experimental setup consisted of influent and effluent tanks, and membrane modules using polyvinyl di–fluoride (pvdf) hollow fibers. the operation program included suction and backwash steps whic...

oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. in this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pre...

polyvinylidene fluoride/polyvinylpyrrolidone (pvdf/pvp) hollow fiber membranes were fabricated by dry-jet wet-spinning process. the correlated effects of the air gap length and pvp concentration ((1) the air gap length effect at the low and high pvp concentration in the dope solutions, as well as (2) the effect of the pvp concentration at the same air gap length) on the cross-section structure ...

Polyvinylidene fluoride/polyvinylpyrrolidone (PVDF/PVP) hollow fiber membranes were fabricated by dry-jet wet-spinning process. The correlated effects of the air gap length and PVP concentration ((1) the air gap length effect at the low and high PVP concentration in the dope solutions, as well as (2) the effect of the PVP concentration at the same air gap length) on the cross-section structure ...

Hydrophilic polyethersulfone (PES) hollow fiber membranes were prepared via non-solvent induced phase separation (NIPS) by addition of polymeric additives as a membrane modifying agent. The effect of the addition of hydrophilic surfactant Pluronic F127, Polyivinylpyrrolidone (PVP), and Tetronic 1307 on the performance of the final PES hollow-fiber membrane was investigated. The morphology of fa...

In this study, the polyvinylidene fluoride (PVDF) hollow fiber hemodialysis membranes were prepared by non-solvent induced phase separation (NIPS). The influences of PVDF membrane thickness and polyethylene glycol (PEG) content on membrane morphologies, pore size, mechanical and permeable performance were investigated. It was found that membrane thickness and PEG content affected both the struc...

Throughout the last 50 years, many improvements have been made for a more effective oxygenator. A large plate type membrane oxygenator, used by Clowes, and a coil type, used by Kolff, has evolved into the small hollow fiber oxygenator. The complex bubble oxygenator, or rotating disk oxygenator, has become a small disposable bubble oxygenator. The currently available oxygenators are extremely sm...

Biocatalytic membrane reactors (BMR) combining reaction and separation within the same unit have many advantages over conventional reactor designs. Ceramic membranes are an attractive alternative to polymeric membranes in membrane biotechnology due to their high chemical, thermal and mechanical resistance. Another important use is their potential application in a biphasic membrane system, where...

In this paper, a system for efficient removal of carbon dioxide by hollow fiber membranes is proposed. The system is compact, and it is very useful for application in the offshore energy industries. In particular, it is used to removing CO2 from the exhaust of power generation facilities on offshore platforms.The proposed dual membrane contactor contains two types of membranes (polypropylene me...