Experiments have been carried out to measure the spark ignition energy of Jet A vapor in air. A range of ignition energies from 1 mJ to 100 J was examined in these tests. The test method was validated by first measuring ignition energies for lean mixtures of the fuels hexane (C6H6) and propane (C3H8) in air at normal temperature (295 K) and pressure (1 atm). These results agree with existing da...

In this study, MIE values measured with two different explosion tubes, HARTMANN and MIKE 3, are compared. Generally, MIKE 3 apparatus provides MIE results, which are equal or lower to those measured with the HARTMANN apparatus; this is particularly true for the energy ranges between 1 and 10mJ and higher than 100mJ. Differences observed can modify samples classification according to their sensi...

Simulations of forced ignition in a non-premixed laminar counterflow are used to study the effect of the strain rate on ignition success. A one dimensional calculation is performed, using detailed methane chemical kinetics, and treating the ignition event as an instantaneous heat release. Ignition success is seen to depend on the mixture composition and spark location, resulting in lean and ric...

The present work investigates the performance and emission characteristics of hydrous methanol fuelled Homogeneous Charge Compression Ignition (HCCI) engine. In the present work a regular diesel engine has been modified to work as HCCI engine. Hydrous methanol is used with 15% water content in this HCCI engine and its performance and emission behavior is documented. A spark plug is used for ass...

This paper reports on the development of novel time resolved spectroscopic imaging techniques for the study of spark ignition phenomena in combustion cells and an SIengine. The techniques are based on planar laser induced fluorescence imaging (PLIF) of OH radicals, on fuel tracer PLIF, and on chemiluminescence. The techniques could be achieved at repetition rates reaching several hundreds of ki...

We analyse the combustion process in a spark ignition engine using the experimental data of an internal pressure during the combustion process and show that the system can be driven to chaotic behaviour. Our conclusion is based on the observation of unperiodicity in the time series, suitable stroboscopic maps and a complex structure of a reconstructed strange attractor. This analysis can explai...

This paper describes the use of a neural network in a technique suitable for diagnostic or condition monitoring applications in a spark-ignition engine. The method involves the use of voltage and current variations at the spark plug under normal running conditions, together with neural network analysis. Waveforms produced under test using this technique contain information relating to the adjus...

This paper deals with highlighting the improvisations in the working of a two-wheeled four stroke internal combustion engines. The efficiency of these small engines were enhanced with increased power output just by increasing the number of fuel igniting element i.e. Spark Plug. Conventional engines employed a single spark plug in its engine for igniting the mixture of fuel and air. But to have ...

The limited fossil fuel resources along with the increased public concerns about pollution levels have increased the need for alternative fuels for use in internal combustion engines. This study is to investigate the variation of the engine performance and exhaust emissions of a spark ignition engine. A spark ignition engine running with gasoline and gasoline blended E5, E10 and E20. Effects of...

One of the most important parameter for spark ignition engines is volumetric efficiency, as it directly influences specific power output. Several definitions of this parameter are studied from a theoretical point of view, taking into consideration the use of alternative fuels. The influence of using gasoline-bioethanol blends is investigated, as well as the effect of fuelling spark ignition eng...