The direct catalytic cracking of biomass pyrolysis vapor into aromatics derived from Douglas fir sawdust pellets was tested using an upfront microwave pyrolysis process coupled with a packed-bed catalysis process using a ZSM-5 Zeolite catalyst. A central composite experimental design (CCD) was used to optimize the bio-oil and syngas yields. The effects of temperature and inverse weight hourly s...

Bio-diesel the mono-alkyl esters of vegetable oils can serve as sustainable energy resources alternative to depleting fossil fuels and has gained more importance due to its clean environmental benefits, renewability and biodegradability. The proposed paper highlights the results of experimental investigations on the scope of utilizing biodiesel manufactured from Polanga and Jatropha oils as an ...

Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which cause...

Biodiesel which were synthesis from transesterification reaction in the present of heterogeneous base catalyst has been intensively studied over the last decades. This catalyst has an excellent result in producing high percentage conversions of biodiesel without further purification and cleaning process which contribute to the water pollution and high water content in biodiesel product. So, thi...

Pyrolysis of kitchen based vegetable waste (KVW) was studied in a designed packed bed reactor. The effect of process parameters like temperature, time and catalyst on bio-gas yield and its composition was studied. The total bio-gas yield was found to be maximum with non-catalysed operation (260ml/g) at 1073K (180min). Higher hydrogen (H(2)) yield with non-catalysed operation (32.68%) was observ...

Conversion of vegetable oils and animal fats composed predominantly of triglycerides using pyrolysis type reactions represents a promising option for the production of renewable fuels and chemicals. The purpose of this article was to collect and review literature on the thermo-chemical conversion of triglyceride based materials. The literature was divided and discussed as (1) direct thermal cra...

Response surface methodology (RSM) was used to optimize the microwave-assisted direct liquefaction of Sargassum polycystum C.Agardh in ethylene glycol (EG) with H(2)SO(4) as a catalyst. Based on the results of single factor experiments, EG-to-feedstock ratio, temperature and catalyst content were chosen as independent variables for a central composite rotatable design (CCRD). The optimal liquef...

A bio-based magnetic nano-catalyst (Fe3O4@nano-dextrin/Ti(IV)) was synthesized via the preparation of Fe3O4@nano-dextrinas magnetic support and then its treatment with titanium tetrachloride (TiCl4). The properties of this catalyst were characterized by different kinds of techniques such as FT-IR, FESEM, TEM, ICP, XRF, VSM and TGA....

Polyurethane-resin doming is currently one of the fastest growing markets in the field of industrial graphics and product identification. Semi-rigid bio-based polyurethanes were prepared deriving from soybean oil as a valuable alternative to fossil materials for digital doming and applied to digital mosaic technology. Bio-resins produced can favorably compete with the analogous fossil polymers,...