The present study aims to investigate the comparative corrosion of light-weight metals such as aluminum and magnesium in palm biodiesel. Immersion test at room temperature was carried out for each metal for 1440 h. Sample characterization techniques employed include weight loss measurement, SEM (scanning electron microscope), XRD (X-ray diffraction), TAN (total acid number) and FTIR (Fourier tr...

the synthesis of polyaniline- fe2o3 nanocomposite coating on aluminum alloy 5052 (aa5052) surface has been investigated by using the galvanostatic method. the anticorrosion performance of polyaniline-fe2o3 coating was investigated in 3.5% nacl solution by the open- circuit potential (ocp), tafel polarization technique and electrochemical impedance spectroscopy (eis). the corrosion rate of polya...

the direct synthesis of polyaniline-tio2 nanocomposite coatings on aluminum alloy 3004 (aa3004) surface has been investigated by using the galvanostatic method. the synthesized coatings were characterized by ft-ir, sem-edx, sem and afm. optical absorption spectroscopy reveals the formation of the emeraldine oxidation state form of polyaniline-tio2 nanocomposite. the corrosion performances of po...

HEDRICK, H. G. (General Dynamics/Fort Worth, Fort Worth, Tex.), C. E. MILLER, J. E. HALKIAS, AND J. F. HILDEBRAND. Selection of a microbiological corrosion system for studying effects on structural aluminum alloys. Appl. Microbiol. 12:197200. 1964.Two laboratory methods, a metal-strip test and a tank test, were evaluated as microbiological corrosion systems for producing corroded test specimens...

The feasibility and parameters optimization of AA5183 aluminum cladding on AISI 1018 steel by electro spark microwelding (ESM) and the corrosion resistance of the clad plate were investigated. The optimum conditions were found as 15 A, 10%, 800 Hz and 2500 rpm for P, D, F and R factors, respectively. Confirmation test under optimum conditions showed that the model can be effectively used to pre...

Microstructure and corrosion performance of admiralty brass (ADB) and aluminum brass (ALB) alloys after passing different annealing heat treatments were investigated using optical and scanning electron microscope, energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), DC polarization measurements and electrochemical impedance spectroscopy (EIS). The results showed that heat tre...

The technological development of all kinds of lightweight transportation devices including vehicles, aircraft, ships, etc. has progressed markedly with the demand for energy saving and environmental protection. Aluminum alloy is in the spotlight as it is a suitable environmentally friendly material. However, deformation is a major problem during the welding process because aluminum alloy has a ...

Aluminum and aluminum alloys can be protected against corrosion by various methods of surface modification (e.g., metal finishing, anodizing, chromate conversion coatings, metallic cladding with Alclad, corrosion protection compounds, and solution phase inhibitors). The desire to deploy environmentally compliant multi-functional coatings has created the need for new concepts that can protect Al...

Corrosion surface damage in the form of pitting and micro-cracks is observed in many metals. Cracks usually initiate from the pits and grow under cyclic stresses and eventually lead to material failure. An image analysis based on wavelet transforms and fractals was used to study the corrosion morphology of nickel aluminum bronze metal under varying corrosion conditions and applied stresses. Ima...