نتایج جستجو برای: al 7075
تعداد نتایج: 443767 فیلتر نتایج به سال:
In this study, a novel system for the detection and quantification of organofluorophosphonates (OFP) has been developed by using an optical sensing polymeric membrane to detect the fluoride ions produced upon OFP hydrolysis. Diisopropyl fluorophosphate (DFP), a structural analogue of type G chemical warfare agents such as Sarin (GB) and Soman (GD), is used as the surrogate target analyte. An op...
Aluminum alloy 7075 (Al 7075) has been widely used in aerospace and automotive industries to replace heavier alloys. This is because of its superior properties high specific strength, corrosion resistance, good formability, recyclability low fabrication cost. However, the ductility heat generation during drilling Al often produces a burr at entrance exit workpiece surface. research investigates...
Composite/metal stack materials, which have excellent mechanical properties, are wideyl used in aerospace industry. However, their machining operation is challenging due to two different material. In this study materials consisting of CFRP and Al 7075-T6 were drilled with drilling parematers investigate delamination defect, thrust force, inner surface roughness hole wear the cutting tool. Cutti...
یکی از مشکلات اصلی در ماشینکاری قطعات جدار نازک از جنس آلیاژهای استحکام بالای آلومینیم، اعوجاج و ناپایداری ابعادی قطعات بعد از ماشینکاری است که منجر به افزایش نرخ قطعات معیوب و افزایش هزینه های تولید می گردد. در این مقاله رابطه تنش های پسماند ناشی از کوئنچ و ماشینکاری قطعات، با میزان اعوجاج یک قطعه جدار نازک از جنس آلیاژ 7075al مورد بررسی قرار گرفته است. بدین منظور، دو گروه آزمایش انجام شده است...
The vacuum brazing of dissimilar Al 7075 and Al–25 Si alloy was investigated. filler copper foil with a thickness 20 μm, the temperature 560 °C held for 10 min. average shear strength brazed joint 26.4 MPa. layer found to be dissolved completely, interface had an irregular shape serrated border, indicating good metallurgical bonding between two alloys. However, factors which might cause deterio...
The viscoelastic response of pure Al and 7075 (AlZnMg) and 2024 (AlCuMg) alloys, obtained with a dynamic-mechanical analyzer (DMA), is studied. The purpose is to identify relationships between the viscoelasticity and fatigue response of these materials, of great interest for structural applications, in view of their mutual dependence on intrinsic microstructural effects associated with internal...
In this study, thermal stress analysis on discs consisting of two different materials was analyzed analytically. Disc were selected SiC/6061 Al Alloy composite and Al-7075 respectively. Assuming that the elasticity module does not change with temperature, performed under constant temperature distributions in area from inner surface disc to outer surface. Thermal distribution. A computer program...
در این پژوهش ابتدا آمیژان al-tib2 به روش در جا تهیه گردید، سپس با استفاده از آن ماده مرکب 7075-tib2 ساخته شد. پس از آن امکان انجام فرآیند نورد گرم بر روی نمونه های ریخته شده مورد بررسی قرار گرفت و با توجه به نتایج آزمایشها، راه حلهایی برای مشکلات شکل پذیری این ماده ارائه گردید.در ادامه بر روی نمونه های نورد شده سه نوع عملیات مختلف آنیل انحلالی ، t73 و t76انجام گرفته و سپس برخی ا...
Electric Discharge Drill Machine (EDDM) is a spark erosion process to produce micro holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the Electric discharge drilling machine it is very necessary to study the process parameters of machine tool. In this research paper a brass rod 2 mm diameter w...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید