Thermal response test (TRT) is an established method to determine design parameters for borehole heat exchanger (BHE) systems; borehole thermal resistance and effective ground thermal conductivity. Most commonly, these tests are performed with heat injection, using the same assumed power level as the planned BHE system. For a thorough description of TRT and current activities around the world, ...

In the presented paper two quality parameters are used to represent the state of a heat exchanger. The remaining lifetime can be estimated by trend regression. Also of interest is the uncertainty of the predicted lifetime which is determined by the confidence interval of the parameter estimation. These algorithms developed are used in this paper in an off-line evaluation of the measurements on ...

In the present study, the heat transfer coefficients of benzene in a spiral plate heat exchanger are investigated. The test section consists of a Plate of width 0.3150 m, thickness 0.001 m and Mean hydraulic diameter of 0.01 m. The mass flow rate of water (Hot fluid) is varying from 0.5 kg sec to 0.8 kg sec and the mass flow rate of benzene (cold fluid) varies from 0.4 kg sec to 0.7 kg sec. Exp...

In most domestic and commercial refrigeration systems, frost forms on the air-side surface of the air-to-refrigerant heat exchanger. Frost-tolerant designs typically employ a large fin spacing in order to delay the need for a defrost cycle. Unfortunately, this approach does not allow for a very high air-side heat transfer coefficient, and the performance of these heat exchangers is often air-si...