This work reports on the first study of thermally induced effect on energy transport in single filaments of silkworm (Bombyx mori) fibroin degummed mild (type 1), moderate (type 2), to strong (type 3). After heat treatment from 140 to 220°C, the thermal diffusivity of silk fibroin type 1, 2, and 3 increases up to 37.9, 20.9, and 21.5%, respectively. Our detailed scanning electron microscopy stu...

The effective parameters that influence in situ cast ferroTic composites were investigated. Centrifugal casting of specimens was carried out using ceramic & metallic molds. OM, SEM and XRD techniques were used to examine the existence of flows in the specimens. Results show that the control of chemical composition, processing, cooling rate and heat treatment has &#10a promising effect on the qu...

The impact of heat on mortality is well documented but deaths tend to occur after (or lag) extreme heat events, and mortality data is generally not available for timely surveillance during extreme heat events. Recently, systems for near-real time surveillance of heat illness have been reported but have not been validated as predictors of non-external cause of deaths associated with extreme heat...

Previous animal models of heat stress have been compromised by methodologies, such as restraint and anesthesia, that have confounded our understanding of the core temperature (T(c)) responses elicited by heat stress. Using biotelemetry, we developed a heat stress model to examine T(c) responses in conscious, unrestrained C57BL/6J male mice. Before heat stress, mice were acclimated for >4 wk to ...

microalloyed cast steels are a group of microalloyed steels in which reliable mechanical properties could be achieved by heat treatment. in this work, the heat treatment processes were carried out on the cast specimens as the step samples by different thicknesses and zr content. the results show that after homogenization, variations in thickness have no effect on the hardness. also, after hea...

Personnel who travel to areas with a hot climate (WBGT > 27°C) may suffer from the heat (physiological strain, thermal discomfort, increased probability of heat illness), making them partially or fully inoperative. Performing physical activities during heat acclimatization is known to improve this process (i.e., improve measures of acclimatization for the same duration of acclimation). However,...

The objective of present study was to evaluate the effect of processing methods and sintering condition on matrix formation and subsequent drug release from wax matrix tablets for controlled release. Ketorolac tromethamine and compritol were processed with appropriate diluent using either dry blending, spray drying, partial melt granulation or melt granulation.The tablets were then sintered at ...

     The synthesis of titania via sol-gel method has been widely studied. In the present work, titania was deposited onto a titanium substrat...

Laser materials processing with ultra-short pulses allows very precise and high quality results with a minimum extent of the thermally affected zone. However, with increasing average laser power and repetition rates the so-called heat accumulation effect becomes a considerable issue. The following discussion presents a comprehensive analytical treatment of multi-pulse processing and reveals the...

The quantity of ionizing radiations needed to sterilize canned foods generally impairs both their nutritive qualities and palatability (Hannan, 1955; Schultz et al., 1956). However, thermal processes also lower these qualities in canned foods (Stumbo, 1949). In both instances, the extent of damage increases with the severity of the treatments. Consequently, the heat processing schedules that ar...