For the purpose of improving the working reliability of the blisk (integrally-bladed disk) under severe environment, a passive vibration reduction method by depositing a hard coating on both sides of blades is developed and then investigated systematically. Firstly, an analytical model of the blisk-deposited hard coating is taken into account. Secondly, by using the Oberst beam theory and axial...

Several investigations have been devoted towards understanding the coating process in fluidized beds. Most of these studies focused on spraying liquid droplets over the bed. However, due to the complexity of these systems, more investigations are still required to quantify the effect of operating conditions on the coating criteria. The present work aims at fundamentally understanding and pr...

The phenomenon of evanescent-wave scattering (EWS) is used to design an optical-fiber humidity sensor. Porous solgel silica (PSGS) coated on the surface of a silica optical-fiber core scatters evanescent waves that penetrate the coating layer. Water molecules in the gas phase surrounding the optical fiber can be absorbed into the inner surface of the pores of the porous silica. The absorbed wat...

water for agriculture is one of the most important factors in arid and semi-arid areas and municipal wastewater treatment is an important resource for this purpose. therefore, potential of transfer contaminations is a serious problem regarding use of treated wastewater for agriculture. due to the risk of transfer contaminations through the use of wastewater, the study of transfer microbes in so...

A new liquid-crystal device for flexible display applications was developed using twofold polymerization process. The cell was fabricated from a homogeneous mixture of a liquid crystal and a polymerforming material. Caused by the spatially nonuniform rate of polymerization and wetting properties, largescale anisotropic phase separation of the liquid-crystal blend and the polymer precursor leads...

A new type of controlled release fertilizers coated with polyurea was prepared. The granulated urea was firstly changed into a liquid urea by heating as the coating liquid. By spraying uniformly the urea was coated with the polyurea synthesized by the reaction of isocyanates with a liquid urea. The effects of different modifiers on N release characteristics of polyurea-coated urea (PCU) were st...

Microstructured reactors (MSRs) are especially indicated for highly demanding heterogeneous catalysis due to the small channel dimensions that minimize diffusional limitations and enhance mass heat transport between fluid catalyst. Herein, we present fabrication protocol of fused filament 3D printing silicone monolithic microreactors based on a multichannel design. Microchannels 200 800 µm in w...

Rough surfaced implants have been reported to favor early bone healing than smooth surfaced implants. Among various methods introduced to roughen the implant surface, coating with calcium phosphate(CaP) is one of them. The purpose of this study was to evaluate the bone healing response of anodized implants with two different coating thickness of CaP(200 nm and 500 nm) deposited by ion beam assi...

Thin films, consisting of a sol–gel Nb2O5 matrix doped with zeolite Na-X synthesized from fly ash through ultrasonic-assisted double-stage fusion-hydrothermal alkaline activation, were deposited by the spin-coating method. In order to improve optical quality and sensing properties thin zeolites wet milled for 60, 120 540 s prior incorporation in film. The liquid adsorption ability films was tes...

Subject of research: coatings based on TiN deposited by pulsed magnetron sputtering have been studied.
 Purpose is to establish the effect technological parameters process sputtering: discharge current and N2 content in vacuum chamber structure phase composition TiN.
 Methods objects structural characteristics TiN-based coating were studied course X-ray diffraction analysis coatings. ...