We study a planar, holey-metal lens made as a set of concentric circular arrays (rings) of nanoscale holes milled in a subwavelength-thick metal film. Each nanohole-a finite-length, circular, single-mode waveguide with a radius-dependent mode index-is used as a phase-shifting element. Our experimental results confirm that the focusing properties of our polarization-independent, holey-metal lens...

Flip chip interconnections using anisotropic conductive film (ACF) are now a very attractive technique for electronic packaging assembly. Although ACF is environmentally friendly, many factors may influence the reliability of the final ACF joint. External mechanical loading is one of these factors. Finite element analysis (FEA) was carried out to understand the effect of mechanical loading on t...

The development of local buckling in the web-post and the compressive regions around the openings of cellular beams is often a critical design consideration. The current buckling assessment of such scenario is still based on simplified models, which are calibrated against detailed finite element models only for specific geometries including layout and range of dimensions, Moreover, the direct u...

In this paper a combined node searching algorithm for simulation of crack discontinuities in meshless methods called combined visibility and surrounding triangles CVT is proposed. The element free Galerkin EFG method is employed for stress analysis of cracked bodies. The proposed node searching algorithm is based on the combination of surrounding triangles and visibility methods; the surroundin...

The finite element modeling (FEM) technique has been applied to study the loading-unloading characteristics, stress and strain fields of the bulk materials such as titanium, iron, copper and thin films of titanium and copper subjected to Berkovich nanoindentation process. The loading and unloading curves obtained from numerical simulation results are compared with the curves obtained earlier th...

PURPOSE To determine the feasibility of using radiochromic and radiographic film with Pipspro software for quality assurance of linear accelerators with no on-board imaging. METHODS The linear accelerator being used is a Varian Clinac 21EX. All IGRT is performed using the BrainLab ExacTrac system. Because of the lack of on board imaging, certain monthly and annual TG-142 quality assurance tes...

objectives : this finite element method study aimed to compare the amount of stress on an isolated mandibular second premolar in two conventional reciprocal parallel interface designs of removable partial dentures (rpds) and the same rpd abutment tooth (not isolated). materials and methods: a kennedy class 1, modification 1 rpd framework was simulated on a 3d model of mandible with three differ...

in this study, an extended stress-based forming limit diagram (fld) for prediction of necking based on the marciniak and kucznski (m-k) model is represented and applied in tube hydroforming. the bulge forming of a straight tube is simulated by finite element method and verified with published experimental data. this adaptive simulation technique is based on the ability to detect the onset and g...