Nomenclature L y spanwise coordinate q net beam loading S shear M bending moment θ deflection angle (= dw/dx) w deflection κ local beam curvature ′ lift/span distribution ′ S η normalized spanwise coordinate (= 2y/b) c local wing chord wing wing area b wing span λ taper ratio E Young's modulus δ tip deflection N load factor m wing mass/span distribution I bending inertia i spanwise station inde...

This paper introduces a new concept of integrating artificial neural networks (ANN) and genetic algorithms (GA) in modeling the deflection basins measured on the flexible pavements. Backcalculating pavement layer moduli are well-accepted procedures for the evaluation of the structural capacity of pavements. The ultimate aim of the backcalculation process from Nondestructive Testing (NDT) result...

Beam-beam deflection scan is a useful tool, both in the SLC and in future linear colliders, for extracting information about the beam position, .w size and luminosity. This technique poses nontrivial challenges to the instrumentation in its own right. The understanding of all aspects of beam-beam deflection, in particular that of disruption, is therefore crucial to a successful implementation o...

This paper considers the aeroelastic optimization of a subsonic transport wingbox under a variety of static and dynamic aeroelastic constraints. Three types of design variables are utilized: structural variables (skin thickness, stiffener details), the quasi-steady deflection scheduling of a series of control surfaces distributed along the trailing edge for maneuver load alleviation and trim at...

Mechanical flexibility in robot manipulators is due to compliance at the joints and/or distributed deflection of the links. Dynamic models of the two classes of robots with flexible joints or flexible links are presented, together with control laws addressing the motion tasks of regulation to constant equilibrium states and of asymptotic tracking of output trajectories. Control design for robot...

In this paper, the dynamic characteristics of clamped-clamped silicon microbeam subjected to electrostatic excitation and mechanical shock is investigated. The Euler-Bernoulli beam model based on the modified couple stress theory with von Kármán geometric non-linearity is utilized in theoretical formulation. Afterwards, squeeze-film damping effects of microstructures for small amplitude vibrati...

In typical dynamic mode operation of atomic force microscopes steady state signals like amplitude and phase are used for detection and imaging of material. In these methods, high quality factor of the cantilever results in high resolution, but low bandwidth and vice versa. In this paper we present a methodology that exploits the deflection signal during the transients of the cantilever motion. ...

Microcantilever sensors offer high sensitivity in the detection of adsorbed molecules based either on resonance frequency shift or changes in cantilever deflection, as both of these signals can be detected with very high resolution. Despite the high sensitivity offered by this platform, cantilevers suffer from poor selectivity due to the lack of sufficiently selective interfacial layers which c...

We report two-dimensional density measurements in a supersonic expansion using beam-deflection optical tomography. Quantitative, high-resolution images with absolute accuracy to 3.5% and spatial resolution to 50 microm were taken with a helium-neon laser and simple apparatus.