The objective of the present work is to study the casting characteristics of various A1-Li alloys, which include fluidity and strengths of the alloys and their interaction with cast molds. Materials investigated are Al-Li-Mg and Al-Li-Cu-Mg alloys with Li content of 2.5 wt%. The results show that sand molds with resin binders are good for A1-Li casting. Ceramic coatings can further reduce the m...

Aiming at establishing a reliable welding technique for magnesium alloys, the laser weldability of different types of magnesium alloys has been investigated using a high-brightness disc laser. It was found that high quality joints could be fabricated in the case of wrought type alloys when a certain defocusing level was optimized for the employed high-brightness laser beam of the newly develope...

Shot peening is known to improve the fatigue performance of structural metallic materials. The improvement in fatigue life is derived primarily from compressive residual stresses that are introduced into the near-surface of the components and which hinder crack initiation and growth. Magnesium alloys are finding increasing use in automotive applications, but their relatively low strength means ...

This paper examines the room-temperature microstructure and mechanical properties of dispersion-strengthened-cast magnesium (DSC-Mg) containing 30 vol.% of 0.33 mm yttria dispersoids. The dispersoids are reasonably well distributed in both cast and extruded materials and the extruded matrix grains size is about 0.88 mm, in agreement with existing models on grain pinning. The Young’s modulus mea...

due to the great variety of applications of magnesium alloys with superior mechanical properties, recent studies have been focused on the hot deformation behavior and microstructure of magnesium alloy castings. although there have been several recent investigations on the microstructure of wrought magnesium alloys after hot deformation, a limited number of studies have been conducted with regar...

Niobium is recognized as an important alloying element in a number of wrought precipitation-hardened nickel-base alloys. It is the purpose of this paper to examine the role that niobium plays in these alloys and describe the properties that are achieved as a result of its inclusion in wrought superalloys. In addition to the general alloying characteristics of niobium as described in the technic...

The growing significance of the material magnesium is closely associated with the progressive development in the field of automotive lightweight construction. The announcement of the VW AG of constructing an one-litre-automobile can be deemed to be a proof of the actuality of research and development in the field of magnesium alloy processing. That automobile, whose frame structure is widely ma...

Traditionally, titanium alloys with satisfactory mechanical properties can only be produced via energy-intensive and costly wrought processes, while titanium alloys produced using low-cost powder metallurgy methods consistently result in inferior mechanical properties, especially low fatigue strength. Herein, we demonstrate a new microstructural engineering approach for producing low-cost titan...