A thin-film InGaAs/GaAs edge-emitting single-quantum-well laser has been integrated with a tapered multimode SU-8 waveguide onto an Si substrate. The SU-8 waveguide is passively aligned to the laser using mask-based photolithography, mimicking electrical interconnection in Si complementary metal-oxide semiconductor, and overlaps one facet of the thin-film laser for coupling power from the laser...

High reflectivity Bragg gratings have been written by ArF excimer laser through a phase mask into IOG-1 hybrid phosphate glass. After grating exposure, a waveguide was fabricated by silver-sodium ion-exchange. Reflectivities around 80% at a wavelength of ~ 1535 nm were measured from the waveguide for both quasi-TE and -TM polarizations. Waveguide laser operation with the photowritten waveguide ...

We numerically investigate nonlinear self-polarization flipping in a silicon waveguide. We identify specific silicon waveguide geometries that enhance this effect to facilitate its fabrication and experimental demonstration by varying various parameters such as fabrication distortion, waveguide loss, dispersion and laser noise to design the silicon waveguide. In optimized waveguides, we show th...

In this paper, we present an Yb-doped Y2O3 waveguide laser fabricated by pulsed laser deposition (PLD) that is Q-switched using a mono-layer graphene saturable absorber. 140 ns pulses at a repetition rate of 1.21 MHz and pulse energy of 14 nJ are achieved at an absorbed pump power of 528 mW. Introduction: Pulsed lasers have a range of applications in areas such as medicine, material processing,...

Nonlinear optics in silicon has drawn substantial attention in the recent years. In this research, laser mode-locking and dual wavelength lasing are achieved in a fiber-ring-cavity using an Erbium–doped fiber amplifier (EDFA) as a gain medium and a 1.7cm long silicon-on-insular waveguide as pulse compressor, a mode-locker and a Raman gain media. We show that the transient behavior of two photon...

For the first time [to our best knowledge] a high-index-contrast z-cut Er:LiNbO(3) photonic wire waveguide laser, optically pumped at 980 nm wavelength, is designed for continuous-wave operation. Waveguide modes and laser characteristics are numerically computed using a developed full vectorial finite-element method based tool. In order to maximize the output power of the laser, the active cavi...

We report on room-temperature subnanosecond waveguide laser operation at 1064 nm in a Nd:YVO4 crystal waveguide through Q-switching of phase-change nanomaterial vanadium dioxide (VO2). The unique feature of VO2 nanomaterial from the insulating to metallic phases offers low-saturation-intensity nonlinear absorptions of light for subnanosecond pulse generation. The low-loss waveguide is fabricate...

Ceramic YAG/Yb:YAG/YAG planar waveguide lasers were realized on continuous-wave and mode-locked operations. The straight waveguide, fabricated by non-aqueous tape casting and solid state reactive sintering, enabled highly efficient diode-pumped waveguide continuous-wave laser with the slope efficiency of 66% and average output power of more than 3 W. The influence of the waveguide structure on ...

A distributed feedback channel waveguide laser in erbium-doped aluminum oxide on a silicon substrate is reported. The optically pumped laser has a threshold pump power of 15 mW and emits 3 mW in single-frequency operation at 1545.2 nm wavelength with a slope efficiency of 6.2% and linewidth of 15 kHz. Keywords—Distributed feedback (DFB) laser; waveguide laser; erbium-doped laser; Bragg gratings...

Integrated Al2O3:Er 3+ channel waveguide ring lasers were realized on thermally oxidized silicon substrates. High pump power coupling intoand low output power coupling fromthe ring is achieved in a straightforward design. Wavelength selection in the range 1532 to 1557 nm was demonstrated by varying the length of the output coupler from the ring. Keywords—waveguide laser; ring laser; erbium-dope...