Stimulated by recent experimental results on superelastic NiTi shape memory alloy, a theoretical study is carried out to quantify the effect of plasticity on stress-induced martensite transformation, using a constitutive model that combines phase transformation and plasticity. A constraint equation is introduced to quantify the phenomenon of the stabilisation of plasticity on stress-induced mar...

Abstract In the present research, the behavior of 304L austenitic stainless steel in the deep drawing process has been studied at the room temperature through experimental and finite element simulation method. Magnetic method calibrated by XRD was used to measure induced-martensite. Martensite volume fraction in the various portion of the deep drawn cup under optimum Blank Holder Force (BHF) a...

l13Cd NMR measurements in two Ag-Cd samples cycled between room temperature and temperatures below M, are presented. The growth curve of the martensite on cooling presents a discontinuity in the cycling temperature region. It is shown that the method of analysis of the NMR data recently developed by us [Phys.Rev.B 46, 10563 (1992)], allows to detect subtle memory effects and the absolute determ...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...

This paper describes an experimental study of stress-induced martensitic phase transformation in the SMA Nickel-Titanium. The rich local thermo-mechanical interactions that underlie transformation are examined using three-dimensional Digital Image Correlation (strain fields) and infrared imaging (thermal fields). We quantify the complex local interactions between released/absorbed latent heat a...

two different dual phase steels were prepared from low carbon manganese steel after the eliminationof the banding using the direct quenching (dq) and the step quenching (sq) procedures. different heattreatments resulted in different martensite morphologies, microstructures and mechanical properties. theheat treatments were designed in such a way to obtain a 0.25 volume fraction of martensite (v...

Nanoindentation measurements were obtained on eight commercially-produced DP980 dual-phase steels to quantify the hardness of the individual constituents, ferrite and martensite, in each steel. Each microstructure was also evaluated to determine grain size, martensite volume fraction (MVF), and retained austenite content. Nanoindentation hardnesses and quantitative microstructural measurements ...

an ultrafine grained dual phase (ufg dp) steel containing niobium was produced by a new routeutilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex startingstructures. the effects of intercritical holding time on the microstructural evolutions and mechanicalproperties were studied. the results showed that increasing intercritical holding time enhnaced ...

An ultrafine grained dual phase (UFG DP) steel containing niobium was produced by a new route utilizing simple cold-rolling and subsequent intercritical annealing of ferrite/martensite duplex starting structures. The effects of intercritical holding time on the microstructural evolutions and mechanical properties were studied. The results showed that increasing intercritical holding time enhnac...

In this study, the effects of nitrogen addition on the production of ultrafine/nano grained AISI 201L stainless steel by advanced thermo-mechanical process were investigated. Cast samples were first homogenized at 1200 °C for 4 h, hot-rolled at 1100 °C and finally, solution-annealed at 1150 °C for 2.5 h. Unidirectional and cross multipass cold rolling at 25 °C was carried out to 90% reduction i...