An effort has been made to improve the coercivity of nanocomposite Nd10Fe82C6B2 alloys, using small amounts (up to 1 at%) of Cr, Ti, Nb, Zr, and Ga. X-ray studies revealed that the amount of –Fe phase in both as-spun and annealed ribbons was significantly reduced for Nb and Zr substitutions, but increased for all the other substitutions. From the magnetic properties point of view, Zr (1 at%) wa...

Tire dust is a significant pollutant, especially as a source of zinc in the urban environment. This study characterizes the morphology and chemical composition of heavy metal particles embedded in tire dust and traffic-related materials (brake dust, yellow paint, and tire tread) as measured by a field emission scanning electron microscope equipped with an energy dispersive X-ray spectrometer (F...

A dehydrogenation anode is reported for hydrocarbon proton conducting solid oxide fuel cells (SOFCs). A Cu-Cr(2)O(3) nanocomposite is obtained from CuCrO(2) nanoparticles as an inexpensive, efficient, carbon deposition and sintering tolerant anode catalyst. A SOFC reactor is fabricated using a Cu-Cr(2)O(3) composite as a dehydrogenation anode and a doped barium cerate as a proton conducting ele...

In low dimensional cuprates several interesting phenomena, including high Tc superconductivity, are deeply connected to electron correlations on Cu and the presence of the Zhang-Rice (ZR) singlet state. Here, we report on direct spectroscopic observation of the ZR state responsible for the low-energy physical properties in two isostructural A-site ordered cuprate perovskites, CaCu(3)Co(4)O(12) ...

Cu–Cr–Zr alloys reinforced in situ with TiCx nanoparticles were prepared via combustion synthesis and electromagnetic stirring casting. The microstructure of TiCx/Cu-Cr-Zr composites various contents was analyzed. microhardness Brinell hardness the determined; average volumetric abrasive wear rate worn surface investigated; electrical, thermal conductivity expansion coefficients materials discu...

Cu–Cr-Zr alloys had wide applications in engineering applications such as electrical and welding industrial especially for their high strength, high electrical as well as acceptable thermal conductivities and melting points. It was possible to prepare the nano-structure of these age hardenable alloys using mechanical alloying method as a cheap and mass production technique to prepare the non-eq...

Ni-implantation has been conducted for sputter deposited Zr alloy films to investigate compositional dependent amorphization behavior in proportion to Ni in Zr alloys. As-deposited Zr and Zr–Cu with thickness of 200 nm shows columnar hcp-Zr and nano-crystalline hcp-Zr(Cu), respectively. Implantation of 150 keV Niþ with the amount of 1 10 ions/cm induces amorphization of Zr and Zr(Cu) with 100 n...

The activation and catalytic performance of two representative Zr-containing intermetallic systems, namely Cu-Zr and Pd-Zr, have been comparatively studied operando using methanol steam reforming (MSR) as test reaction. Using an inverse surface science and bulk model catalyst approach, we monitored the transition of the initial metal/intermetallic compound structures into the eventual active an...