The microhardness, H, of carbon black–polycarbonate and carbon black– low-density polyethylene composites was investigated. Two types of microadditives with different average particle sizes were employed. It has been shown that the morphology of the polymeric matrix conspicuously influences the hardness dependence of the composites with volume concentration of filler, f. The microhardness of th...

In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

This review provides a comparison of submicron-diameter carbon filaments and conventional carbon fibers as fillers in composite materials. Carbon filaments (0.1 mm diameter, catalytically grown) are superior to conventional carbon fibers (discontinuous) as a filler in providing polymer–matrix and cement–matrix composites for electromagnetic performance, but are inferior to the fibers as a fille...

in the processing of carbon/carbon composites using polymer resin as the matrix precursor, it is inevitable that a porous structure was formed after carbonization. as a result, densification by liquid phase impregnation followed by recarbonization is required to obtain a densified composite. consequently, the char formability of resin is an important factor in reducing the number of densificati...

Carbon nanotubes are being used in place of carbon fibers in making composites due to their high strength, high aspect-ratio and excellent thermal and electrical conductivity. Although carbon nanotubes were discovered more than a decade ago, works on preparation of satisfactory composites reinforced by carbon nanotubes have encountered difficulties. This review will discuss some registered pate...

In the present study, traditional and hybrid composites were prepared by Hand lay-up molding and investigated. The composites constituents were unsaturated polyester resin as the matrix, 3% and 6% volume fractions of carbon fibers as reinforcement and 3% of Al2O3, Al, Cement and local Gypsum (calcium sulfate anhydrate CaSO4) as filler particles. The investigated physical properties were density...

In this work, ozone modification method and air-oxidation are used for the surface treatment of polyacrylonitrile(PAN)based carbon fiber. The surface characteristics of carbon fibers are characterized by X-ray photoelectron spectroscopy (XPS). The interfacial properties of carbon fiber reinforced polyamide 6 (CF/PA6) composites are investigated by means of the single fiber pull-out tests. As a ...

Electrophoretic process was applied to the deposition of carbon nanotubes on the surface of carbon fabrics in order to enhance the properties of CNT/carbon fabric hybrid composites. Carbon fabrics were modified by two methods: Cu deposition by cathodic method and Cu coating by thermal vaporization method. CNTs were modified by PEI and oxidation treatment. The effects of carbon fabric and CNTs m...

MgAl2O4/Ti(C,N) composites were synthesized through aluminothermic reaction between Al,TiO 2,MgO powders and phenolic resin in coke bed condition. Effect of addition of carbon black and sugar into the mixture at different temperatures were investigated. The phases and microstructures of samples were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). MgAl 2O4 ...