نتایج جستجو برای: wear at high temperature
تعداد نتایج: 5191141 فیلتر نتایج به سال:
Abrasive wear is defined wear due to hard particles or hard protuberances forced againts and moving along a solid surface. This defination encompasses several different mechanisms by which material removal occoures. The five types of wear are abrasive, adhesive, erosion, fatigue and fretting. The abrasive wear of polymeric materials is the interest and the subject of quite number of literature....
Steel composites reinforced with alumina nanoparticles were prepared by powder metallurgy process. Samples containing two different amounts of carbon (0.35 and 0.55 wt.%) and 0-5 wt.% Al2O3 nanoparticles were fabricated by mixing, compacting and sintering of diffusion bonded Distaloy AE powder. The density, hardness and wear tests were performed on the prepared samples. Fu...
This work considers use neurofuzzy set theory for estimate abrasion wear resistance of steels based on chemical composition, heat treatment (austenitising temperature, quenchant and tempering temperature), hardness after hardening and different tempering temperature and volume loss of materials according to ASTM G 65-94. Testing of volume loss for the following group of materials as fuzzy data ...
B4C ceramic particulate–reinforced Al 5083 matrix composite with various B4C content was fabricated successfully via hot-press sintering under Argon atmosphere. B4C particles presented relative high wettability, bonding strength and symmetrical distribution in the Al 5083 matrix. The hardness value, friction coefficient and wear resistance of the composite were higher than those of the Al 5083 ...
The effect of cutting parameters and tool parameters on cutting forces and tool wear were investigated in high density fiberboard (HDF) peripheral up-milling using toughened ceramic cutting tools. The results showed that whether at low speed cutting or high speed cutting, the tangential forces Ft and normal forces Fr increased slowly with the increase of cutting length. The tangential forces Ft...
A R T I C L E I N F O AISI D2 steel, Tool wear, Workpiece surface temperature, Taguchi method, Regression analysis. Received 19 July 2012 Accepted 29 August 2012 Available online 31 December 2012 Now-a-days increasing the productivity and the quality of the machined parts are the main challenges of metal cutting industry during turning processes. Optimization methods in turning processes, consi...
In the present stady, thermochemical treatment in H2/NH3 atmosphere was used as a post-treatment for electroless Ni-P coatings on the AISI 4140 steel substrates. High phosphorus (9%) coatings with thicknesses of 2, 24 and 48 m were applied and the effects of the thermochemical treatment on the morphology, structural changes, roughness, hardness and wear resistance of coatings were studied b...
In the present stady, thermochemical treatment in H2/NH3 atmosphere was used as a post-treatment for electroless Ni-P coatings on the AISI 4140 steel substrates. High phosphorus (9%) coatings with thicknesses of 2, 24 and 48 m were applied and the effects of the thermochemical treatment on the morphology, structural changes, roughness, hardness 

and wear resistance of coatings were studi...
growing demands and requires of high data rate systems cause significant increase of high frequency systems for wideband communication applications. as mixers are one of the main blocks of each receivers and its performance has great impact on receiver’s performance; in this thesis, a new solution for ku-band (12-18 ghz) mixer design in tsmc 0.18 µm is presented. this mixer has high linearity a...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید