In this paper, the effect of microstructure on the thermal conductivity of plasma-sprayed Y2O3 stabilized ZrO2 (YSZ) thermal barrier coatings (TBCs) is investigated. Nine freestanding samples deposited on aluminum-base superalloy are studied. Cross-section morphology such as pores, cracks, m-phase content, grain boundary density of the coated samples are examined by scanning electron microscopy...

effects of temperature and percentage of organic modifier were studied on retention and selectivity in rp-hplc using solvation parameter model. the system constants were determined by multiple linear regression analysis from experimental values in the retention factor for a group of different solutes with known descriptors by computer using the program spss/pc. the experimental results showed t...

Ž . The electrocopolymerization of carbazole and acrylamide on highly oriented pyrolytic graphite HOPG from ACN solutions Ž . via cyclovoltammetry CV was studied in order to evaluate the possibility to deposit uniform and thin but pinhole-free and still reactive coatings onto graphite-like substrates. The morphology of the coatings was investigated using atomic force microscopy and the coating ...

normally has an uneven surface. When surface tension can Following the application of a liquid coating to a curved subbe considered to be uniform, capillary forces tend to reduce strate, surface tension forces will act to redistribute the coating surface irregularities to produce a level film. This is the layer. The coating will thin at outside corners and thicken at dominant effect leading to ...

Magnetic beads with ~1.9 µm average diameter were used to transport microliter volumes of liquids between contiguous liquid segments with a tube for the purpose of investigating phase change of those liquid segments. The magnetic beads were externally controlled using a magnet, allowing for the beads to bridge the air valve between the adjacent liquid segments. A hydrophobic coating was applied...

Pure carbon(C), nitrogen(N) and titanium(Ti) doped diamond-like carbon (DLC) coatings were deposited on silicon (Si) micro-molds by dc magnetron sputtering deposition to improve the tribological performance of the micro-molds. The coated and uncoated Si molds were used in injection molding for the fabrication of secondary metal-molds, which were used for the replication of micro-fluidic devices...

Three dimensional rotatory modes of oscillations in a one-dimensional chain of rodlike charged particles or dust grains in a plasma are investigated. The dispersion characteristics of the modes are analyzed. The stability of different equilibrium orientations of the rods, phase transitions between the different equilibria, and a critical dependence on the relative strength of the confining pote...

In this study, Al2O3, TiO2 and Al2O3+ 3wt%TiO2 coatings were deposited on AZ31 Mg alloy substrate by plasma spraying. The structurally characterized scanning electron microscopy X-ray diffraction. Corrosion experiments carried out in 3.5% NaCl solution. Adhesion tests performed according to daimler benz VDI-3198 standard. A coating layer of approximately 70 microns thickness was deposited. High...

This article investigates the effect of contact ageing on fretting damage of an epoxy-based cathodic electro-deposited coating for use on automotive seat slide tracks (made of cold-rolled high strength steel). Static normal load was induced at the contact between the coating and an AISI52100 ball for a certain duration. It was identified that plastically deformed contact area increased logarith...

effects of temperature and percentage of organic modifier were studied on retention and selectivity in rp-hplc using solvation parameter model. the system constants were determined by multiple linear regression analysis from experimental values in the retention factor for a group of different solutes with known descriptors by computer using the program spss/pc. the experimental results showed t...