INTRODUCTION There is a popular belief among some musicians that playing a wind instrument regularly can affect the position of the teeth. The aim of this study was to investigate this hypothesis. METHODS A cross-sectional observational study was carried out, comparing the occlusions of 170 professional musicians selected from 21 orchestras and organizations in the United Kingdom. The subject...

Idioms are a big part of languages but can cause trouble for communication, especially for non-native speakers of a language. Interpreting idioms correctly means that one must derive a figurative meaning from words that individually mean something else. Recent research primarily focuses on the impact of context for successful idiom comprehension and seems to prioritize native speakers’ understa...

Ba ferrite materials with porous microstructures were prepared from a natural cedar wood template in order to investigate new electromagnetic shielding materials. The wood templates were infiltrated with barium nitrate and iron nitrate solutions (molar ratio = 1:12) and dried to form ferrite gel, then, they were sintered in air at a temperature between 800 °C and 1400 °C. The 1-dimensional poro...

An assessment of the thermal control mechanisms applicable to solid breeder blanket designs under ITER-like operating conditions is presented in this paper. Four cases are considered: a helium gap; a sintered block Be region; a sintered block Be region with a metallic felt at the Be-clad interface; and a Be packed bed region. For these cases, typical operating conditions are explored to determi...

SnO2 micro/nano fibers in the rutile structure were synthesized using electrospinning and metallorganic decomposition techniques. Fibers were electrospun using two different precursor solutions, one based on SnCl4 and the other on C22H44O4Sn. The fibers were sintered in air for two hours at 400, 500, 600, 700 and 800oC. SEM, AFM, XRD, XPS and Raman microspectrometry were used to characterize th...

In the present work, Al2O3-CeO2 composite nanopowders were synthesized via co-precipitation method. The sinterability of the synthesized powders was investigated. The results showed that the transformation of transition phases of alumina to α-Al2O3 takes place at 1200 °C. TEM images showed that the powders was composed of nanoparticles in the range of 30−70 nm. The densification of composites s...

Porous Cu bodies with complex shapes were fabricated by freeze-casting and vacuum sintering water-based CuO slurry. The sintered bodies showed no noticeable macroscopic defects and good shape tolerance. The interconnected pore tunnels were observed by electronic microscopy. The pore size became smaller and the porosity and volume shrinkage of sintered porous bodies decreased with the increase o...

Bimetallic (Pd-Cu, Pd-Sn) nanoparticles supported on structured fibrous carbons (activated carbon fibers and carbon nanofibers grown on sintered metal fibers) were tested in denitrification of natural polluted water by hydrogen (a batch and continuous mode). Dependence of the activity/selectivity on catalyst chemical composition, promoter nature and metal particle size was studied. Sn-modified ...

A two-stage sintering practice was applied to W­3.99Ni­1.71Fe (mass%) to control its microstructural evolution and, accordingly, mechanical properties under high strain rates. Unlike the traditional one-stage liquid phase sintering, the alloy was first solid-state-sintered to close to full densification, and then liquid-phase-sintered by induction heating where the cooling rate was fast. With t...

The present study aims to develop zirconia-Silica sand nanoparticles composites through powder processing route and to study the physical properties, mechanical properties and microstructure of the composites. Zirconia based silica sand nanoparticles composite with 5, 10, 15 and 20 wt.% were developed through powder processing technique and sintered at 1500°C for two hours. A decreasing trend o...