The texture evolution accompanied by grain growth was investigated in a nanocrystalline Fe-78wt%Ni alloy, namely permalloy fabricated by using an electrodeposition method. The as-deposited specimen revealed a strong <100>//ND and a weak <111>//ND fibre-type textures. Grain growth took place during annealing beyond 370°C and resulted in the texture change such that the <111>//ND fibre strongly d...

Platinum-diffused γ+γ' coatings (~20 at.% Al, ~22 at.% Pt) were synthesized on René 142 and René N5 Ni-based superalloys by electroplating the substrates with ~7 μm of Pt, followed by an annealing treatment in vacuum at 1175°C. In order to study the compositional and microstructural evolution of these coatings at elevated temperatures, interdiffusion experiments were carried out on coated speci...

ss as: Sa t bark. Abstract Biosorption of nickel ions from aqueous solutions by modified loquat bark waste (MLB) has been investigated in a batch biosorption process. The biosorbent MLB was characterized by FTIR analysis. The extent of biosorption of Ni(II) ions was found to be dependent on solution pH, initial nickel ions concentration, biosorbent dose, contact time, and temperature. The exper...

A flip-chip, batch transfer process for LIthographie, Galvanoformung and Abformung (LIGA) microstructures has been demonstrated by selective electroplating and bonding. Single layer LIGA microstructures with thickness of 200 m are fabricated on a dummy substrate first. They are then batch transferred to an IC substrate by means of bonding via electroplating. After the selective bonding process,...

A real time image-guided electroplating system is proposed in this paper. Unlike previous electroplating systems, instead of using the intermittent mode to electroplate 500um long copper specimen, a CCD camera and a motion controller are used to adjust anode-cathode distance to obtain better results. Since the image of the gap distance is highly deteriorated due to complex chemical-electrical o...

Metal deposition by electroplating has been extensively used and analyzed for industrial applications, but it remains insufficiently characterized for fabricating compliant micromechanisms. This research presents a new fabrication process for heterogeneous optimized compliant mechanisms that consists of placing two materials side by side as opposed to the convention of stacking materials layer ...