The effect of porosity on the elastic behavior of cast steel is investigated experimentally, and an approach for including porosity effects in finite element analysis (FEA) simulations is presented. Porous cast steel specimens are mechanically tested having apparent elastic moduli reduced between 17 and 61 pct. Analysis of radiographs and tomography is used to measure and reconstruct the porosi...

................................................................................................................. XII

Article history: Received:29.09.2013. Received in revised form: 17.12.2013. Accepted: 24.12.2013. A three-dimensional Computer Aided Design (CAD) model of the bearing sleeve casting is established by Pro/E software. The ViewCast program is utilized for studying casting processes of solidification and mould-filling in order to optimize the casting technology. Based on the solidification simulati...

An investigation into influence of the austenitising temperature and the austenite deformation temperature on Nb precipitation and recrystallisation kinetics was carried out for a steel containing 0.081C-0.021Ti-0.064Nb (wt. %). The austenite grain structure was correlated to the dispersive properties of Nb atom clustering and precipitation. Irrespective of the austenitising temperature, deform...

in this investigation, continuous cooling transformations and microstructures have been studied in detail in a low carbon ti-nb bearing microalloyed steel by means of dilatometry, metallography and hardness measurements. the results indicate that when the cooling rate is greater than 1˚c/s, the dilatation curve is associated with a major dilatation at relatively low transformation temperatures,...

Austenite grain growth in microalloyed steels is governed by the coarsening of fine precipitates present at grain boundaries below the grain coarsening temperature. Zener model is widely used in metals to describe the pinning effect of second phase particles precipitated in the matrix. In this work it has been discussed whether grain boundary or volume diffusion is the rate controlling process ...

There have been great developments in the area of civil engineering in the recent few decades and among these, construction and material innovation are quite prominent. Steel-concrete composite construction has emerged as one of the fastest methods of construction. Even though considerable research efforts on conventional reinforced concrete columns have been executed prior to now, concrete fil...

Navy C-Ring test parts were made of AISI 1022, 4320, 8625, and CF8M steels and heat treated in a designed experiment to evaluate the commercial heat treatment distortion simulation software DANTE. The parts were machined and then measured with a CMM for original dimensions. The parts were then heated and subsequently quenched in two different immersion orientations in agitated water. Temperatur...

Fatigue and monotonic test specimens having porosity ranging from microto macroscopic levels were cast from 8630 steel. Monotonic and fatigue properties were obtained to determine the effect of porosity on the mechanical performance of the cast steel. Axial fatigue tests were conducted under fully reversed conditions in both strain and load control on specimens containing microporosity, and in ...