The purpose of this study was to examine the effects of load carrying methods, stair slopes and walking speeds on heart rate and walking postures. Nine participants climbed up and down stairs with various stair slopes (24°, 30° and 36°), walking speeds (72, 96, and 132 steps per minute), and using different load carrying methods (empty loads, backpack, and hand-held). The effects of these facto...

Mechanical joints, such as the bolted shear lap joint considered here, are ubiquitous in engineered structures, which realize vibration damping as well as load transfer from them. However, the prediction of the energydissipation characteristics of such joints remains a challenging problem. A cubic relationship between energy dissipated and load magnitude is often assumed in classical joint dyna...

An experimental study is presented on the effects of bolt-hole clearance on the load distribution in multi-bolt composite joints. Single-shear, three-bolt joints were studied. The specimens were manufactured from graphite/epoxy HTA/6376, with quasi-isotropic lay-ups. Protruding head bolts of 8 mm diameter and torqued to finger-tight conditions were used. Different combinations of clearance were...

Farm youth often carry loads that are proportionally large and/or heavy, and field measurements have determined that these tasks are equivalent to industrial jobs with high injury risks. The purpose of this study was to determine the effects of age, load amount, and load symmetry on lower extremity joint moments during carrying tasks. Three age groups (8-10 years, 12-14 years, adults), three lo...

fracture mapping of late permian-early triassic flat-lying sedimentary rocks in the sydney basin,new south wales, australia, shows that joints developed originally in extension were faulted in subsequentevents. joints with a regional distribution fall into two (early and late) formed groups. group i joints propagatedhorizontally and never interfered with each other. these joints were subsequent...

Results of an experimental investigation of the seismic performance of prefabricated column-footing connections are presented. Tests were conducted on six 1/4-scale prefabricated column specimens inserted into prefabricated footings in two Groups. Group-1 consisted of four specimens, which were tested under constant axial load and cyclic inelastic lateral displacements. The remaining two specim...

Slow circular movements of the hand with a fixed wrist joint that were produced in a horizontal plane under visual guidance during conditions of action of the elastic load directed tangentially to the movement trajectory were studied. The positional dependencies of the averaged surface EMGs in the muscles of the elbow and shoulder joints were compared for four possible combinations in the direc...

Differential strain has been proposed to be a causative factor in failure of the supraspinatus tendon. We quantified the strains on the joint and bursal sides of the supraspinatus tendon with increasing load (20 to 200 N) and during 120 degrees of glenohumeral abduction with a constant tensile load (20 to 100 N). We tested ten fresh frozen cadaver shoulders on a purpose-built rig. Differential ...

Introduction The load response of a knee joint is dominated by the mechanical properties of articular cartilage, which consists of proteoglycan matrix, collagen fiber network and a fluid. The interplay of these three constituents determines the load support of articular cartilage in the joint. Finite element analysis has been widely applied to study joint mechanics. Accurate knee contact geomet...

The knee joint is one of the most common sites for osteoarthritis, the onset and progression of which are believed to relate to the mechanical environment of cartilage. To understand this environment, it is necessary to take into account the complex biphasic contact interactions of the cartilage and menisci. In this study, the time-dependent contact behaviour of an intact and a meniscectomized ...