The spin coating of thin (> 200 nm thick) and ultrathin (< 200 nm thick) polymer films is examined in several solvents of varying volatility over a broad range of polymer solution concentrations and spin speeds. Experimentally measured film thicknesses are compared with a simple model proposed by Bornside, Macosko, and Scriven, which predicts film thickness based on the initial properties of th...

The pure elements Ti, Zr, Cr, Nb were selected to produce an TiCrZrNb alloy target and deposited thin films thereof by a reactive high vacuum DC sputtering process. Nitrogen was used as the reactive gas to deposit the nitride thin films. The effect of nitriding on the properties of the TiCrZrNbNx film was tested by changing the nitrogen ratio of the atmosphere. All of the as-deposited TiCrZrNbN...

The physics of particle-laden thin film flow is not fully understood, and recent experiments have raised questions with current theory. There is a need for fully two-dimensional simulations to compare with experimental data. To this end, a numerical scheme is presented for a lubrication model derived for particle-laden thin film flow in two dimensions with surface tension. The scheme relies on ...

In this paper we study the Lagrangian mean drift induced by spatially damped capillary-gravity waves on a surface covered by an elastic film. The analysis is developed with regard to a typical laboratory setup, and explicit solutions for both transient and steady horizontal drift velocities are given. We consider a situation where the film covers the entire surface and is prevented from driftin...

The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabri...

A new two-layer model has been proposed to study microscale heat transfer associated with a developing flow boundary layer. As an example, a cold, microscale film of liquid impinging on an isothermal hot, horizontal surface has been investigated. The boundary layer is divided into two regions: a micro layer at microscale away from the surface and a macro layer at macroscale away from the surfac...

A microelectromechanical systems (MEMS) thermal flow sensing array constructed of biocompatible materials has been designed, fabricated, nd tested. In addition to the construction, the electronic biasing conditions were selected such that sensor operation was compatible with biological uids. The device comprises several thin film platinum sensing elements sandwiched in a Parylene C membrane. Th...

An approximate growth model was employed to predict the time required to grow a graphene film by chemical vapor deposition (CVD). Monolayer graphene films were synthesized on Cu foil at various hydrogen flow rates from 10 to 50 sccm. The sheet resistance of the graphene film was 310Ω/□ and the optical transmittance was 97.7%. The Raman intensity ratio of the G-peak to the 2D peak of the graphen...

Shear viscous drag within the thin fluid film at the contact between grains in water-saturated sand is an important loss mechanism for high-frequency sound in the Biot-Stoll plus contact squirt flow and shear viscous drag (BICSQS) model [J. Acoust. Soc. Am. 116, 2011-2022 (2004)]. Couette flow was assumed for the shear drag but it breaks down when inertial effects within the film become signifi...

A versatile enzyme immobilization strategy for thin film continuous flow processing is reported. Here, non-covalent and glutaraldehyde bioconjugation are used to immobilize enzymes on the surfaces of borosilicate reactors. This approach requires only ng of protein per reactor tube, with the stock protein solution readily recycled to sequentially coat >10 reactors. Confining reagents to thin fil...