The uniaxial compression-creep behavior of unidirectionally reinforced continuous-fiber composite materials was investigated for the case where both the matrix and the fiber underwent plastic deformation by creep. The creep behavior of NiAl composites reinforced with 5 to 20 vol pct tungsten fibers was characterized at 1025 8C. The NiAl-W composites exhibited a three-stage creep behavior, with ...

Low cycle fatigue–creep is the main reason for the failures of many engineering components under high temperature and cyclic loading. Based on the exhaustion of the static toughness and dissipation of the plastic strain energy during fatigue failure, a new low cycle fatigue–creep life prediction model that is consistent with the fatigue–creep damage mechanism and sensitive to the fatigue damage...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...

Two Ti2AlNb intermetallic orthorhombic (O) alloys, Ti-15Al-33Nb and Ti-21Al29Nb(at.%), were subtransus processed into sheets, using pancake forging and hot-pack rolling, and evaluated in tension (25 and 650°C) and creep (650-710°C) and the properties and deformation behavior were related to microstructure. Some of the microstructural features evaluated were grain boundary character, grain size,...

Diffusion-controlled-creep processes are used to assess the creep behavior of dispersion and solute hardened materials at coarse and fine grain sizes. It is shown that the creep behavior of a dispersion strengthened (DS) Al–Mg alloy is similar to the creep behavior of pure Al–Mg alloys. Both materials show dislocation climb and dislocation solute-drag contributions to creep. It is shown that th...

A high temperature measurement system for creep deformation based on the digital image correlation (DIC) technique is described. The new system is applied to study the behaviour of a multi-pass welded joint in a high temperature tensile test and a load controlled creep test at 545°C. Spatially resolved tensile properties and time dependent creep deformation properties across a thick section typ...

This paper presents a review of creep deformation and rupture mechanism of P91 alloy for the development of its creep damage constitutive equations under lower stress level. Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to ass...

This paper summarizes and presents research progress on the fundamentals of the development of creep damage constitutive equations for high Cr steels including 1) a brief summary of the characteristics of creep deformation and creep damage evolution and their dependence on the stress level and the importance of cavitation for the final fracture; 2) a critical review of the state of art of creep...

Introduction: Simple models of geomorphic modification of planetary surfaces by erosion or deposition are reported here. These processes are linear and non-linear creep, uniform accrescence and decrescence, and non-linear airfall deposition. They do not include models of flow whose depth is of the same order of magnitude as the landform, such as glacial flow or relaxation of crater forms in pla...

This paper presents a review of creep deformation and rupture mechanisms of low Cr-Mo alloy for the development of its creep damage constitutive equations under lower stress. The most popular Kachanov-Robatnov-Hayhurst (KRH) formulation was not necessarily developed and calibrated for low stress and cannot depict the creep strain accurately under multi-axial state of stress due to the three-dim...