In this research, comparative study of corrosion resistance of aluminum based alloys and Al-alloys with nickel have been investigated. Several processes are conducted for the AlZn-Mg-Cu alloys and Al-Zn-Mg-Cu-0.5%Ni alloys were homogenized, aged then retrogressed and reaged; also, alloys were homogenized then the extruded thereafter heat treated. Al-Zn-Mg-Cu alloy and AlZn-Mg-Cu-Ni alloy sample...

In this study, we aim to investigate the effect of galvanic corrosion on mechanical properties aluminum-CFRP adhesive joints. Aluminum-CFRP, aluminum-aluminum, and CFRP-CFRP joint specimens were prepared. Subsequently, subjected accelerated aging treatment in a salt spray environment, tensile shear strength, transition failure surface deposition state components products with time quantitativel...

A new eddy-current system based on low-noise magnetoresistive sensors has been developed to detect cracks and corrosion in thick, multi-layer metal structures. The new instrument has detected narrow slots as short as 6.3 mm, in the lowest layer of a stack of three aluminum plates totaling 25 mm in thickness. These flaws were detected through 19 mm of overlying aluminum, in spite of the presence...

1 General Introduction Recently, transmitting greater amounts of electric energy has become a global issue that has arisen due to the fact that current transmission line designs (based upon steel cores) are thermally limited, which restricts the amount of power that can be delivered. Utilities are faced with the difficult task of increasing power delivery under severe constraints [1]. To solve ...

Corrosion scales and deposits formed within drinking water distribution systems (DWDSs) have the potential to retain inorganic contaminants. The objective of this study was to characterize the elemental and structural composition of extracted pipe solids and hydraulically-mobile deposits originating from representative DWDSs. Goethite (alpha-FeOOH), magnetite (Fe(3)O(4)) and siderite (FeCO(3)) ...

The purpose of this investigation was to develop a coating technique and to study the characteristics of titanium–aluminum nitride [(Ti,Al)N] films deposited on a base-metal alloy (Wiron88R) substrate. Titanium–aluminum nitride thin films were deposited on the alloy surface using a reactive radiofrequency sputtering method. The electrochemical properties of three specimens with and without coat...

Abstract: Dolomite based refractories are widely used in Iranian steelmaking plants. In the present research, wear and corrosion of refractories used in steel-making converter lining in Esfahan Steel Company was studied. Post-mortem analysis of refractories clarified that the wear started with oxidation of carbon followed by chemical corrosion. Iron oxide from slag reacted with calcia, resu...

Metal coating, metal materials are of two or more layers. The coating metals are widely used in industry. These sheets or saving performance and cost effective solution or both the user. Performance coating metals according to usage in structural applications, settings thermal expansion of the thermo-mechanical control (thermostat), electrical, magnetic, corrosion resistant, flowering and decor...